Abstract:This article explores a novel post‐oxidization process for producing highly piezoelectric zinc oxide (ZnO) thin films. Statistical methods are used in conjunction with extensive material characterization to provide a thorough investigation and optimization of the films. Linear statistical interpolation and modelling are also utilized to provide a deep understanding of the relationship between newfound deposition parameters and piezoelectricity. This work presents a study of piezoelectric zinc oxide (ZnO) thin films deposited by a novel post‐reactive sputtering method. The process utilizes a rotating drum with DC magnetron sputtering deposition onto substrates with subsequent DC plasma‐assisted oxidation of the deposited metal to metal oxide. The paper analyzes the influence of plasmaassisted magnetron sputtering (PA‐MS) deposition parameters (O2 plasma source power, O2 flow, and Ar flow) on the morphological, structural, optical, and piezoelectric properties of ZnO thin films. Design of experiments has been utilized to evaluate the role of these parameters on the growth rate (rg) and the properties of resulting films. Results indicate a predominant influence of the plasma power on the rg over other parameters. Among the eight tested samples, three of them show high crystal quality with high intensity (0001) diffraction peak, characteristic of the wurtzite crystalline structure of ZnO, and one of them exhibits piezoelectric coefficient values of ≈11pC N−1. That sample corresponding to a ZnO film deposited at the lowest rg of 0.075 nm s−1, confirmed the key role of the deposition parameters on the piezoelectric response of films, and demonstrated PA‐MS as a promising technique to produce high‐quality piezoelectric thin films.

Study on technology of zinc oxide piezoelectric thin film device with surface micromachining substrate

Theoretical study on design of ZnO piezoelectric thin film sensors

Deposition and Characterization of AZO Thin Films on Flexible Glass Substrates Using DC Magnetron Sputtering Technique

Preparation Technique Of Aln Piezoelectric Thin Film

The Compatibility of Zno Piezoelectric Film with Micromachining Process

Processing Compatibility of ZnO Piezoelectric Film with MEMS Device

Fabrication and Characterization of Piezoelectric Cantilever for Micro Transducers

Study of zinc tin oxide thin-film transistor

On the Piezoelectric Properties of Zinc Oxide Thin Films Synthesized by Plasma Assisted DC Sputter Deposition

Excellent Uniformity and Properties of Micro-Meter Thick Lead Zirconate Titanate Coatings with Rapid Thermal Annealing

Influence of Buffer Layers on the Piezoelectric Property of ZnO Film

Fabrication of PZT microdevices using a high-yield sol-gel process

Improved piezoelectric properties of zno films obtained by magnetron sputtering power stacking process

Deposition Condition Investigation of High c-axis Preferred Orientation ZnO Films Produced by RF Magnetron Sputtering

Synthesis, Microstructure and Properties of Magnetron Sputtered Lead Zirconate Titanate (PZT) Thin Film Coatings

Micromachined Piezoelectric Acoustic Device

Preparation and Etching of Silicon-Based Piezoelectric Thin Films for Integrated Devices

Study on Compatible Cmos-Mems Process with Surface Micromachining for the Application of Monolithic Integration

Micromachined piezoelectric devices for acoustic applications

Controlled Evolution of Surface Patterns for ZnO Coated on Stretched PMMA Upon Thermal and Solvent Treatments