Abstract:Ferroelectric thin film is the target of the interest in micro electromechanical system, memory etc. Smart MEMS is to be developed with such smart materials thin films. In spite of the success in commercialization of FRAM application, MEMS application is still under R&D state. Despite to their promising properties, there are only few reports on the use of such layers as MEMS devices. Problems for application are mainly caused by the necessary very small dimension of such devices, in contrast to limitations and tolerances of the used micro-technologies. Although deposition of piezoelectric PZTlayer using different thin-film technologies has reached an advanced state, the layers of more than 1 micron thickness needed for MEMS applications is still difficult to deposit. To deal with these problems, the structure or the function of the devices has to be coped with such technologically caused constraints, like thickness deviation and deformation by residual stress, as well as optimization of materials processing parameters. As an application of the thin films, Piezoelectric SFM and scanning mirror device are designed and fabricated as examples of the target MEMS devices with special emphases placed on materials, processing and device structure optimization. Sol gel deposited as well as Pulsed Laser Ablation Deposited PZT layers have been developed and applied for the devices. To compensate the deformation of the devices, bimorph PZT actuator is also presented. A piezoelectric SPM is expected to provide a promising answer to High density data storage devices, as the piezoelectric layer serves as a actuator for the cantilever as well as a force sensor. This paper describes a novel probe arrays integrated with micro-heaters for the AFM thermal mechanical data storage. The probes have cantilevers 3um thick, 100-200um long, and 30-70um wide, and have micro-heater integrated on the triangle end of the cantilever. The cantilever consists of a piezoelectric layer on a silicon base for the heater actuation and force sensing. The Lead-Titanate-Zirconate (PZT) is selected as the piezoelectric material for its high piezoelectric coefficients comparing to crystal materials (for example, ZnO2). We design the heater on the triangle end of the cantilever, and shape the apex part as the narrowest to get the biggest power dissipation. The prototype of the device has been fabricated and characterized.

Processing Compatibility of ZnO Piezoelectric Film with MEMS Device

The Compatibility of Zno Piezoelectric Film with Micromachining Process

Study on technology of zinc oxide piezoelectric thin film device with surface micromachining substrate

Theoretical study on design of ZnO piezoelectric thin film sensors

Micro-Fabrication Technology for Piezoelectric Film Formationand its Application to MEMS

Flexible Piezo-Mems Fabrication Process Based on Thinned Piezoelectric Thick Film

Influence of Buffer Layers on the Piezoelectric Property of ZnO Film

Preparation and characterization of lead zirconate titanate thick films prepared by chemical solution deposition for MEMS applications

&Lt;title>ferroelectric Pb(Zr<formula><inf><roman>0.53</roman></inf></formula>, Ti<formula><inf><roman>0.47</roman></inf></formula>)O<formula><inf><roman>3</roman></inf></formula> Thin Films for Smart MEMS</title>

Preparation of A High-Quality Pzt Thick Film with Performance Comparable to Those of Bulk Materials for Applications in Mems

A Self-Aligned Mask-Free Fabrication Process for High-Frequency ZnO Array Transducer

High Quality PZT Thick Films Using Silicon Mold Technique for MEMS Applications

Fabrication and characterization of zinc oxide piezoelectric MEMS resonator

Study on Compatible Cmos-Mems Process with Surface Micromachining for the Application of Monolithic Integration

Excellent Uniformity and Properties of Micro-Meter Thick Lead Zirconate Titanate Coatings with Rapid Thermal Annealing

Piezoelectric Biosensor Platform Based on ZnO Micro Membrane

Enhancing Manufacturability of SU-8 Piezoelectric Composite Films for Microsystem Applications

Fabrication and Characterization of Piezoelectric Cantilever for Micro Transducers

Fabrication and Mechanical Characterization of A Microscale Electrophoretic Polymer Based on Mems Technology

Giant Piezoelectric Properties of ZnO Film Doped with Acceptor-Donor Ionic Pair