Abstract:In this study, the effects of different influence factors on electroplating-based via-filling process were studied in a systematic manner. A through-silicon-via (TSV) chip was firstly designed, the chip size was $16\times 10{\rm mm}^{2}$ with the TSV interconnects. The via was in diameter of $50\mu {\rm m}$ and depth of $75\mu {\rm m}$. The deep reactive ion etching (DRIE) technique was employed to fabricate the vias onto the silicon wafer. In order to fill up the vias by using the electroplating process, the ${\rm SiO}_{2}$ isolation layer was firstly prepared onto the sidewall and the defined surface of the wafer using the plasma enhanced chemical vapor deposition (PECVD) technique, the TiW barrier layer was prepared onto the ${\rm SiO}_{2}$ layer with the sputtering process, the Cu seed layer was then deposited onto the barrier layer by the sputtering process to provide a foundation for copper growth during electroplated deposition. To achieve the “bottom-up” via-filling, the addictives were added into the copper plating solution. The results showed that the void free Cu filling can be achieved with an optimal additives ratio. The variation in both via opening and depth were found to be key factors influencing the via-filling quality. The process parameters such as current density, power waveform and so on were found to affect the vial filling quality. A comparison on the effects of key process parameters was made, showing that the current density, voltage waveform, and pulse reserve are three key parameters that affect the filling quality more than other parameters.

Parametric Study, Modeling of Etching Process and Application for Tapered Through-Silicon-via

Research on Integrated Trench Etching for Trench-Type Power MOSFET

Electrothermal modelling of through silicon via (TSV) interconnects

Sensitivity analysis of through-silicon via (TSV) interconnects for 3-D ICs

Etching Scallop-Less Nano-Tsv with F/O Coupling Plasma

Optimization of innovative approaches to the shortening of filling times in 3D integrated through-silicon vias (TSVs)

Parametric Study of DRIE Process for Enhancing the Profile-Preserving Property of Square Through Silicon Via

Plastic analysis for through silicon via with actual etching defect of triangular-teeth and scallops.

Simulation studies on PECVD SiO2 process aiming at TSV application

Investigation and Modeling of Etching Through Silicon Carbide Vias (TSiCV) for SiC Interposer and Deep SiC Etching for Harsh Environment MEMS by DoE

Parametric Studies of Nanoscale Through-Silicon Vias under the Reflow in Advanced Packaging

Fabrication and Characterization of Fine Pitch TSV Integration with Self-Aligned Backside Insulation Layer Opening.

Parametric study of electroplating-based via-filling process for TSV applications

Modeling and Electromagnetic Analysis of Multilayer Through Silicon Via Interconnect for 3D Integration

Improvement of Via Dishing and Non-Uniformity in TSV Chemical Mechanical Planarization

CU seed, CMP process development and via resistance extraction in through silicon via technology

Fabrication of Microchannel Embedded Tsv Interposer and Its Influence on Tsv'S Electrical Parameters

Fabrication, Characterization, and Simulation of a Low-Cost TSV Integration Without Front-Side CMP Process

Copper Chemical Mechanical Polishing and Wafer Thinning with Temporary Bonding for Through Silicon Via Interconnect

3D Modeling and Finite-Element Full-Wave Simulation of TSV for Stack Up SIP Integration Applications