Abstract:In this paper, the operation mechanism of trench termination is investigated through 2-D numeric simulation on Silvaco. It is found that in trench termination, the electric field is terminated by the accumulated holes at the outer trench sidewall. In order to ensure a high termination breakdown voltage, the trench is refilled with a combination of SiO<sub>2</sub> and polyimide (PI). Through various 2-D numerical simulations, the impact of structural parameters on breakdown voltage has been discussed, namely, trench depth (TD), trench width (TW), and sidewall tilt angle. The 3-D simulations are also conducted to investigate the effect of round corner radius on the device breakdown voltage and electric field in the dielectrics. Based on these results, the trench termination is designed and then fabricated along with a p-i-n diode. The measurement results show that a $14~mu text{m}$ wide trench is sufficient to terminate a voltage of 1750V (>96% of the ideal planar breakdown). Comparing with conventional field limiting rings junction termination extension (FLR/JTE) technology, this trench termination can significantly reduce the termination length by a factor of 4. As a result, the area efficiency is largely improved from 62% to around 90% for a 2A device conducting at 1000 A/cm<sup>2</sup>. These results indicate that the SiC device price can be substantially lowered with such an area-efficient trench termination technology. Furthermore, the 168-h high-temperature reverse bias (HTRB) test under 1200 V and 175 °C shows the potential of this trench termination for long-term reliable operation. Finally, unclamped inductive switching (UIS) tests have been conducted on fabricated devices. Compared to commercial SiC junction barrier Schottky diodes with FLR, fabricated p-i-n diodes with trench termination -how significant higher avalanche capability.

4H-Sic BJTs with Epitaxial Junction Termination Composite Structure

Research on an Improved Junction Termination Structure for 4H-SiC BJTs

4H-Sic Trench-gate MOSFET with JTE Termination

3kV 6.7mΩ·cm<sup>2</sup> 4H-SiC BJT with An Effective Junction Termination Extension (JTE)

3kV 6.7mΩ·cm2 4H-SiC BJT with An Effective Junction Termination Extension (JTE)

Novel Structure Of 4h-Sic Bipolar Junction Transistor

Hybrid Termination with Wide Trench for 4H-Sic Super-Junction Devices

Design and Characterization of Area-Efficient Trench Termination for 4H-SiC Devices

High Current Gain 4H-Sic Bipolar Junction Transistor

Improved Etched Multistep JTE for UHV SiC Power Devices

Novel 4h‐sic BJT Utilizing Floating Buried Layer in Base for High Current Gain, High Current Gain Stability and High Breakdown Voltage

Etched Junction Termination Extension With Floating Guard Rings And Middle Rings For Ultrahigh-Voltage 4h-Sic Pin Diodes

Multi-Step Junction Termination Extension Design and Simulation Study for 4H-Sic Schottky Barrier Diode

A Novel 4H-Sic Lateral Bipolar Junction Transistor Structure with High Voltage and High Current Gain

Expanding the Dose Window of Step-Etched Space-Modulated JTE for Ultrahigh Voltage 4H-Sic Devices

A New Edge Termination Technique for High-Voltage Devices in 4H-Sic–multiple-floating-zone Junction Termination Extension

Normally-off trench JFET technology in 4H silicon carbide

5.8-kV Implantation-Free 4H-SiC BJT With Multiple-Shallow-Trench Junction Termination Extension

Novel 4H-SiC bipolar junction transistor (BJT) with improved current gain

4H-Sic Super-Junction JFET: Design and Experimental Demonstration

Evaluation of Termination Techniques for 4H-Sic Pin Diodes and Trench JFETs