Abstract:Through defect modulation, ZrB 2 powder was controllably synthesized using the carbon thermal reduction (CTR) method, with boron powder serving as a novel additive. Thermodynamic data for the ZrO 2 -B 2 O 3 -C system in the presence of boron were calculated using HSC thermodynamic software. Additionally, TG-DSC thermal analysis combined with XRD was used to investigate the reaction process. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) were used to analyze the defect structure and grain surface characteristics of the reaction products. The results indicate that the reaction of B with ZrO 2 and C exothermically alters the nucleation environment of ZrB 2 grains. The helical dislocations generated act as a source of crystal growth steps, promoting the growth of smooth interfaces and leading to a transformation of the ZrB 2 grain growth mechanism. Quantitative calculations of the dislocation density of ZrB 2 powders, using the convolutional multiple whole profile fitting (CMWP-fit), suggest that the inclusion of boron as an additive can modulate the defect concentration of the products. ZrB 2 powders with varied dislocation densities were achieved through meticulously controlled synthesis methods, followed by subsequent densification via hot pressing sintering. The results indicated that the relative density of ZrB 2 ceramics increased from 83.9 % to 96.7 % as the dislocation density of the powder increased from 2.7 × 10 13 m −2 to 7.6 × 10 14 m −2 with the rise in boron content from 0 wt% to 3 wt%. In addition, the defects create extra sintering-driving forces that induce a shift in the densification mechanism from grain boundary diffusion to dislocation slip during hot-pressing sintering. This shift results in an increase in the apparent activation energy from 105 kJ/mol to 210 kJ/mol.

Carbothermal Reduction Acted Synergistically with Sol.Gel Method to Synthesize ZrB2 Nanoparticles

Carbothermal Reduction Synthesis Of Zirconium Diboride Powders Assisted By Microwave

Improvement of ZrB2 nanopowder synthesis by sol-gel method via zirconium alkoxide/boric acid precursors

Synthesis of zirconium boride (ZrB2) rod crystals through salt-assisted boro/carbothermal reduction

Synthesis of Ultra-Fine and High-Pure Zirconium Diboride Powders Using Solution-Based Processing

A General Propylene Epoxide-assisted Sol-Gel Route for the Synthesis of ZrO2-SnO2 Composite Sols

Reaction mechanism of self-propagating magnesiothermic reduction of ZrB2 powders

The Fabrication of ZrO2–ZrC Microspheres by Internal Gelation and Carbothermal Reduction Process

Fully dense ZrB 2 ceramics by borothermal reduction with ultra‐fine ZrO 2 and solid solution

Effect of Carbon Powder on ZrC ZrO2 Microspheres Prepared by Internal Gelation Process

Effects of Zr on the Precursor Architecture and High-Temperature Nanostructure Evolution of Sioc Polymer-Derived Ceramics

Defect-regulated synthesis of ZrB 2 powders via carbon thermal reduction and elucidation of its hot-pressing densification mechanism

Highly Efficient and Low-Temperature Preparation of Plate-Like ZrB₂-SiC Powders by a Molten-Salt and Microwave-Modified Boro/Carbothermal Reduction Method.

Synthesis of Monolithic Zirconia with Macroporous Bicontinuous Structure Via Epoxide-Driven Sol–gel Process Accompanied by Phase Separation

Synthesis of Single-Crystalline Pb(Zr0.52Ti0.48)O-3 Nanocrystals by Hydrothermal Method

Hydrogen Storage Performance of 2lih + MgB 2 Doped with Hydrothermal-Synthesized ZrO 2 Nanorods

Preparation of Zirconia Powders by Sol-gel Process

Hydrothermal Synthesis and Characterization of Zirconia Nanocrystallites

In-situ synthesis of hierarchically high porosity ZrB 2 ceramics from carbon aerogel template with excellent performance in thermal insulation and light absorption

Synthesis and Characterization of Zirconium Nitride Nanopowders by Internal Gelation and Carbothermic Nitridation

Carbothermal synthesis of zirconium carbide hollow microspheres from polyzirconoxane and phenolic resin by spray drying