Abstract:A hydrothermal method was employed to synthesize the precursor of nano-zirconium carbide, which was subsequently heat treated at high temperatures under vacuum to obtain finely dispersed nanometer-sized zirconium carbide powder through a carbothermic reduction reaction. Scanning Electron Microscopy (SEM) was utilized to examine the microstructure of the precursors obtained under different hydrothermal conditions and carbon contents. The effects of different heat treatment temperatures on the microstructure of the products were analyzed. Transmission Electron Microscopy (TEM) confirmed the boundary coating structure of the hydrothermal precursor and provided insights into the phase structure of the nanometer-sized zirconium carbide. The reaction mechanism and temperature involved in the carbothermic reaction process were determined through calculations. Furthermore, the energy, phase and microstructure of the reaction were investigated using Thermogravimetric Analysis (TG-DSC) and X-ray Diffraction (XRD) at different temperatures. The obtained results revealed that the zirconium carbide precursor was synthesized via the hydrothermal method exhibited a coreshell structure with a boundary coating, which not only ensured uniform contact between C and ZrO2 particles but also facilitated the formation of zirconium carbide. The results show that the most suitable process parameters are Zr/C 1: 7, 240 degrees C and 24 h. The thermodynamic calculation results show that ZrO2 combines with carbon to form CO and ZrC when the temperature reaches 1656.56 degrees C. As the temperature rises, CO reacts with ZrO2 to form ZrC and CO2. TG-DSC shows that the carbothermal reduction reaction starts at 1100 degrees C and reaches its peak at 1418 degrees C. XRD analysis confirms that when the temperature reached 1450 degrees C ZrC appeared. At 1600 degrees C, the phase transition of ZrC is basically completed. TEM images showed that the synthesized zirconium carbide particles were about 30 nm.

Carbothermal Reduction Synthesis Of Zirconium Diboride Powders Assisted By Microwave

Synthesis of Ultra-Fine and High-Pure Zirconium Diboride Powders Using Solution-Based Processing

Preparation and Characterization of Zirconium Carbide Nano Powder by Hydrothermal and Carbothermal Reduction Methods

Preparation of Nano-Zrb2 Powder by Ca Liquid Assisted Boronation Reaction Between ZrC and B4C

Carbothermal Synthesis of Ultra-Fine Zirconium Carbide Powders Using Inorganic Precursors Via Sol–gel Method

Carbothermal Reduction Synthesis of Nanocrystalline Zirconium Carbide and Hafnium Carbide Powders Using Solution-Derived Precursors

Preparation Of Nanocrystalline Zirconium Carbide Powders By Carbothermal Reduction

Highly Efficient and Low-Temperature Preparation of Plate-Like ZrB₂-SiC Powders by a Molten-Salt and Microwave-Modified Boro/Carbothermal Reduction Method.

Thermodynamics of Nano-Zirconium Carbide Powder Prepared by Hydrothermal Synthesis and Carbothermal Reduction

Low-Temperature Synthesis of Nanocrystalline ZrB2 via Co-reduction of ZrCl4 and BBr3

Solid-state reaction synthesis of ZrC from zirconium oxide at low temperature

Processing of Nanocrystalline Zirconium Carbide Powders

Ultrafine ZrB2 Ceramic Powders Prepared by a Sol–Gel Method Synergized with a Carbothermic Reaction and Their Improved Sintering Performance

Fully dense ZrB 2 ceramics by borothermal reduction with ultra‐fine ZrO 2 and solid solution

Reaction mechanism of self-propagating magnesiothermic reduction of ZrB2 powders

Pressureless Sintering of Zirconium Diboride Ceramics with Boron Additive

Preparation of ZrB2 by reduction of B4C and its high temperature conductivity

Carbothermal Preparation of Ultra-Fine TiB2 Powders Using Solution-Derived Precursors Via Sol-Gel Method

Carbothermal synthesis of zirconium carbide hollow microspheres from polyzirconoxane and phenolic resin by spray drying

Synthesis of zirconium boride (ZrB2) rod crystals through salt-assisted boro/carbothermal reduction

Stability and Reactivity of Zirconium Diboride in Intermediate-Temperature Hydrothermal Conditions: A Comprehensive Analysis