Abstract:Through defect modulation, ZrB 2 powder was controllably synthesized using the carbon thermal reduction (CTR) method, with boron powder serving as a novel additive. Thermodynamic data for the ZrO 2 -B 2 O 3 -C system in the presence of boron were calculated using HSC thermodynamic software. Additionally, TG-DSC thermal analysis combined with XRD was used to investigate the reaction process. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) were used to analyze the defect structure and grain surface characteristics of the reaction products. The results indicate that the reaction of B with ZrO 2 and C exothermically alters the nucleation environment of ZrB 2 grains. The helical dislocations generated act as a source of crystal growth steps, promoting the growth of smooth interfaces and leading to a transformation of the ZrB 2 grain growth mechanism. Quantitative calculations of the dislocation density of ZrB 2 powders, using the convolutional multiple whole profile fitting (CMWP-fit), suggest that the inclusion of boron as an additive can modulate the defect concentration of the products. ZrB 2 powders with varied dislocation densities were achieved through meticulously controlled synthesis methods, followed by subsequent densification via hot pressing sintering. The results indicated that the relative density of ZrB 2 ceramics increased from 83.9 % to 96.7 % as the dislocation density of the powder increased from 2.7 × 10 13 m −2 to 7.6 × 10 14 m −2 with the rise in boron content from 0 wt% to 3 wt%. In addition, the defects create extra sintering-driving forces that induce a shift in the densification mechanism from grain boundary diffusion to dislocation slip during hot-pressing sintering. This shift results in an increase in the apparent activation energy from 105 kJ/mol to 210 kJ/mol.

Reaction mechanism of self-propagating magnesiothermic reduction of ZrB2 powders

Carbothermal Reduction Synthesis Of Zirconium Diboride Powders Assisted By Microwave

Synthesis of Ultra-Fine and High-Pure Zirconium Diboride Powders Using Solution-Based Processing

Reaction Behavior and Formation Mechanism of ZrB2 and ZrC from the Ni-Zr-B4C System during Self-Propagating High-Temperature Synthesis

PREPARATION AND CHARACTERIZATION OF ZrB2-Al2O3 COMPOSITE POWDER BY SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS WITH REDUCTIVE PROCESS

Zrb2/Al2o3 Composite Powders Prepared by Self-Propagating High-Temperature Synthesis

A Novel Gas–solid Reaction Process to Synthesize Low Oxygen MgB2 Powder Using Mg Vapour

Defect-regulated synthesis of ZrB 2 powders via carbon thermal reduction and elucidation of its hot-pressing densification mechanism

Synthesis of Ti0.2Zr0.8B2 Solid‐solution Nanopowders by Molten Salt Assisted Borothermal Reduction

Combustion and formation behavior of hybrid ZrB 2 and ZrC particles in Al-Zr-B 4C system during self-propagation high temperature synthesis

Self-Propagating High-Temperature Synthesis of the Heterophase Materials in the Zr–Mo–Si–B System: Kinetics and Mechanisms of Combustion and Structure Formation

In Situ Formation of Titanium Diboride/Magnesium Titanate Composites by Magnesiothermic-Based Combustion Synthesis

Preparation of Nano-Zrb2 Powder by Ca Liquid Assisted Boronation Reaction Between ZrC and B4C

Key issues on the reactive sintering of ZrB2 ceramics from elementary raw materials

Solid-state reaction synthesis of ZrC from zirconium oxide at low temperature

Preparation of ZrB2 by reduction of B4C and its high temperature conductivity

Highly Efficient and Low-Temperature Preparation of Plate-Like ZrB₂-SiC Powders by a Molten-Salt and Microwave-Modified Boro/Carbothermal Reduction Method.

Deoxidation Behavior of Zr Powder Manufactured by Using Self-Propagating High-Temperature Synthesis with Mg Reducing Agent

Ultrafine ZrB2 Ceramic Powders Prepared by a Sol–Gel Method Synergized with a Carbothermic Reaction and Their Improved Sintering Performance

Reaction Behavior and Formation Mechanism of ZrC and ZrB2 in the Cu–Zr–B4C System

Low-Temperature Synthesis of Nanocrystalline ZrB2 via Co-reduction of ZrCl4 and BBr3