Abstract:To address the various shortcomings of a high material cost, energy-intensive temperature conditions and ultra-low efficiency of the conventional boro/carbothermal reduction method for the industrial preparation of ZrB2-SiC powders, a novel molten-salt and microwave-modified boro/carbothermal reduction method (MSM-BCTR) was developed to synthesize ZrB2-SiC powders. As a result, phase pure ZrB2-SiC powders can be obtained by firing low-cost zircon (ZrSiO4), amorphous carbon (C), and boron carbide (B4C) at a reduced temperature of 1200 degrees C for only 20 min. Such processing conditions are remarkably milder than not only that required for conventional boro/carbothermal reduction method to prepare phase pure ZrB2 or ZrB2-SiC powders (firing temperature of above 1500 degrees C and dwelling time of at least several hours), but also that even with costly active metals (e.g., Mg and Al). More importantly, the as-obtained ZrB2 particles had a single crystalline nature and well-defined plate-like morphology, which is believed to be favorable for enhancing the mechanical properties, especially toughness of their bulk counterpart. The achievement of a highly-efficient preparation of such high-quality ZrB2-SiC powders at a reduced temperature should be mainly attributed to the specific molten-salt and microwave-modified boro/carbothermal reduction method.

Highly Efficient and Low-Temperature Preparation of Plate-Like ZrB₂-SiC Powders by a Molten-Salt and Microwave-Modified Boro/Carbothermal Reduction Method.

Low Temperature-Rapid Preparation of HfB2–SiC Powders by Microwave/molten Salt Assisted Boro/carbothermal Reduction

Ultrafine ZrB2 Ceramic Powders Prepared by a Sol–Gel Method Synergized with a Carbothermic Reaction and Their Improved Sintering Performance

Solution-Based Synthesis of Ultra-Fine ZrB2 Powders and ZrB2-SiC Composite Powders

Low Temperature Synthesis of ZrB 2 Powder Synergistically by Borothermal and Carbothermal Reduction

Effect of ZrB2 powders on densification, microstructure, mechanical properties and thermal conductivity of ZrB2-SiC ceramics

Synthesis of Ultra-Fine and High-Pure Zirconium Diboride Powders Using Solution-Based Processing

Solution-Based Synthesis of Ultra-Fine ZrB<sub>2</sub> Powders and ZrB<sub>2</sub>-SiC Composite Powders

Carbothermal Reduction Synthesis Of Zirconium Diboride Powders Assisted By Microwave

Preparation of ZrB2 by reduction of B4C and its high temperature conductivity

Low-Temperature High-Efficiency Preparation of TiB 2 Micro-Platelets via Boro/Carbothermal Reduction in Microwave Heated Molten Salt.

Synthesis of ZrB2-SiC-ZrC Composite Powders with Core-Shell Structure Via Sol-Gel Molecular Modulation

Synthesis of zirconium boride (ZrB2) rod crystals through salt-assisted boro/carbothermal reduction

Preparation of Nano-Zrb2 Powder by Ca Liquid Assisted Boronation Reaction Between ZrC and B4C

Preparation and Mechanical Properties of ZrB2-based Ceramics Using MoSi2 As Sintering Aids

Microstructure and phase evolution behavior of SiZrBC ceramic precursors synthesized via sol–gel method

Synthesis and formation mechanism of ZrC–SiC–TiC ceramic powders with high-sinterability via sol-gel process and carbothermal reduction

In Situ Synthesis of Ultrafine Zrb2-Sic Composite Powders and the Pressureless Sintering Behaviors

Ultra-fine Zirconium Diboride Powders Prepared by a Combined Sol–gel and Spark Plasma Sintering Technique

Morphology and Mechanism Study for the Synthesis of ZrB2–SiC Powders by Different Methods

Preparation of ZrB<sub>2</sub>-ZrC-SiC-ZrO<sub>2</sub> nanopowders with in-situ grown homogeneously dispersed SiC nanowires