Abstract:Multi-phase UHTCs are favoured for their superior ablation resistance and mechanical properties. In this work, to improve the efficiency and decrease the sintering temperature and pressure, the (Zr, Hf)C and SiC hybrid nanocrystalline particles were prepared via the sol-gel method combining carbothermal reduction at 1600 degrees C. Utilizing their high sinterability, a relative density of 96.1% (Zr, Hf) C-SiC composite was obtained at the conditions of 1900 degrees C and 30 MPa using SPS technology. XPS and FT-IR results demonstrate that Zr, Hf, and Si were successfully trapped in the cross-linking structure of the precursors. Precursors of Zr, Hf, and Si reached a molecular-level mixture in the gel phase. SEM, XPS, and XRD characterization showed that the Si-C bond was formed preferentially, leading to the emergence of SiC whiskers and SiC wrapped (Zr, Hf)C with increasing temperature. And, the (Zr, Hf)C can be easily generated during solid solution reaction. Eventually, a nanoscale mixture of (Zr, Hf)C and SiC particles was successfully obtained at 1600 degrees C. The hardness and compressive strength of the (Zr, Hf)C-SiC composite were 12.94 GPa and 622 MPa, respectively. Comparing usual sintering processes (over 2000 degrees C and 35 MPa), the reason for the improved sinterability can be attributed to the high sintering activity of the (Zr, Hf)C and SiC hybrid particles, and the existence of the solid solution and nano-SiC.

Synthesis and formation mechanism of ZrC–SiC–TiC ceramic powders with high-sinterability via sol-gel process and carbothermal reduction

Improving the sinterability of ZrC-SiC composite powders by Mg addition

Synthesis, Characterization and Application of Submicron ZrSiO4 Powder Via Sol-Gel-microemulsion-hydrothermal Method

Effect of MgCl2 Addition on the Preparation of ZrC–SiC Composite Particles by Sol-Gel

The Synthesis of High Sinterability (zr, Hf)C and SiC Hybrid Nanocrystalline Particles by Sol-Gel Method

Pressureless Sintering of ZrB2-SiC Ceramics Incorporating Sol-Gel Synthesized Ultra-Fine Ceramic Powders

In Situ Synthesis of Ultrafine Zrb2-Sic Composite Powders and the Pressureless Sintering Behaviors

Pressureless Sintering of ZrC-based Ceramics by Enhancing Powder Sinterability

The Effect of Sol-Gel Process on the Microstructure and Particle Size of ZrC–SiC Composite Powders

SPS densification and ablative performance of ZrB2–SiC–ZrC composites derived from the ternary powders by sol-gel

Syntheses of ZrC–SiC Nanopowder Via Sol–gel Method

Carbothermal Synthesis of Ultra-Fine Zirconium Carbide Powders Using Inorganic Precursors Via Sol–gel Method

Novel (Zr, Ti)(C, N)–SiC ceramics via reactive hot-pressing at low temperature

Microstructure and Microwave Dielectric Properties of Tio2-Doped Zn2sio4 Ceramics Synthesized Through the Sol-Gel Process

Synthesis of ZrB2-SiC-ZrC Composite Powders with Core-Shell Structure Via Sol-Gel Molecular Modulation

Effect of ZrB2 powders on densification, microstructure, mechanical properties and thermal conductivity of ZrB2-SiC ceramics

Ultrafine ZrB2 Ceramic Powders Prepared by a Sol–Gel Method Synergized with a Carbothermic Reaction and Their Improved Sintering Performance

Pressureless Sintering of Zrb2-Sic Composites Strengthening by Ultra-Fine Ceramic Powders

Densification, microstructure and mechanical properties of ZrB2–SiCw ceramic composites

In Situ Synthesis Mechanism and Characterization of ZrB2–ZrC–SiC Ultra High-Temperature Ceramics

Synthesis of mesoporous carbon-bonded TiC/SiC composites by direct carbothermal reduction of sol-gel derived monolithic precursor