Abstract:Zirconium diboride and silicon carbide are thought to have a low intrinsic sinterability due to their strong covalent bonds, low bulk and grain boundary diffusivities. ZrB2-SiC ceramic composites were prepared by a field assisted pressureless sintering process in the present work. The densification behavior and the effect of sintering temperature on microstructure and properties of sintered samples were studied. Pellets were in-situ formed by dry uniaxial pressing in the graphite die at a pressure of 50MPa for 3min and then sintered at a sintering temperature ranged from 1650 °C to 1950 °C with fixed heating rate and holding time. The current, voltage, temperature and displacement data were all collected by the real-time acquisition system. The bulk densities were determined by Archimedes method and the microstructure of samples was characterized by SEM. The onset of some measurable shrinkage of the green body was recorded at around 1400 °C regardless of the sintering temperature and significant shrinkage took place at higher temperature of around 1600 °C. For the sample sintered at 1950 °C, no shrinkage occurred after ~2min holding time. The relative density increased significantly with increasing temperatures and samples could be densified to a relative density of more than 99% at 1950 °C by the field assisted sintering process without obvious grain growth.

Preparation and Mechanical Properties of ZrB2-based Ceramics Using MoSi2 As Sintering Aids

Mechanical Properties of ZrB<sub>2</sub>-Based Ceramics Reinforced by Nano-SiC Whiskers

Mechanical properties of ZrB2-based ceramics reinforced by nano-SiC whiskers

Processing and Mechanical Properties of Zirconium Diboride‐Based Ceramics Prepared by Spark Plasma Sintering

Effects of SiC Platelet and ZrSi2 Additive on Sintering and Mechanical Properties of ZrB2-based Ceramics by Hot-Pressing

Microstructure and Mechanical Properties of ZrB2-SiC Composites

Densification, microstructure and mechanical properties of ZrB2–SiCw ceramic composites

Preparation and properties of SiCpl/ZrB2 ultra-high temperature ceramics

Mechanical Properties of ZrB2–SiC Ceramics Prepared by Polymeric Precursor Route

Pressureless Sintering of Silicon Carbide Ceramics Containing Zirconium Diboride

Preparation of Zrb2 Based Hybrid Composites Reinforced with Sic Whiskers and Sic Particles by Hot-Pressing

Effect of sintering temperature and holding time on the microstructure and mechanical properties of ZrB2–SiCw composites

Preparation and Characterization of ZrB 2 -Sic Ultra-High Temperature Ceramics by Microwave Sintering

Fabrication of SiCw reinforced ZrB2-based ceramics

Preparation and Mechanical Properties of Laminated Zirconium Diboride/molybdenum Composites Sintered by Spark Plasma Sintering

Pressureless Sintering of Zrb2-Sic Composites Strengthening by Ultra-Fine Ceramic Powders

Microstructure and properties of silicon carbide whisker reinforced zirconium diboride ultra-high temperature ceramics

Mechanical and Electrical Properties of MoSi2-based Ceramics with Various ZrB2-20 Vol% SiC As Additives for Ultra High Temperature Heating Element

Influence of Hot Pressing Temperature and SiC Content on the Microstructure and Mechanical Properties of ZrB2-SiC

Spark plasma sintering and hot pressing of ZrB2–SiCW ultra-high temperature ceramics

Study on ZrB2-SiC Prepared by Field Assisted Sintering