Abstract:Two compositions Ce0.50Zr0.39La0.04Y0.07O2−δ and Ce0.25Zr0.65La0.04Y0.06O2−δ based on ceria-zirconia solid solutions were prepared as nanopowders using a continuous hydrothermal flow synthesis reactor, followed by either freeze-drying or hotplate-drying of the slurry. Each dried nanopowder was then subjected to 10h heat-treatment at 1000°C, 1100°C or 1200°C in air (to simulate accelerated ageing). The reducibility and hydrogen consumption of the oxidised samples were measured using temperature programmed reduction (TPR) up to 1000°C. The effects of composition, drying method and heat-treatment temperature were evaluated on the TPR profiles of the materials. The powders were further investigated using a range of analytical methods including UV/Vis spectroscopy (which yielded colour data), Raman spectroscopy, powder X-ray diffraction, BET surface area measurements and X-ray photoelectron spectroscopy (XPS). Chemometric methods were used to investigate relationships between the spectroscopic and total oxygen storage capacity (OSC) data. Principal component analysis (PCA) was used to provide a simple interpretation of the effects of various synthesis and treatment parameters on Raman spectra. Principal component regression (PCR) was used to build regression models relating the Raman spectra and the temperature of hydrogen consumption peak at several set temperatures in the TPR. The total hydrogen consumption of the materials was generally high, while the drying and heat-treatment conditions appeared to have a significant effect on the final properties of the resulting powders, such as the surface area and total oxygen storage capacity.

Hydrothermal Synthesis and Characterization of Zirconia Nanocrystallites

Monoclinic zirconium oxide nanostructures synthesized by a hydrothermal route

A Simple and Novel Low-Temperature Hydrothermal Synthesis of ZnO Nanorods

Optimization of the structure and morphology of monoclinic phase nanoscale zirconium dioxide

The Hydrothermal Synthesis of ZrO<sub>2</sub> Nanoparticles and Their Optical Absorption Properties

Preparation and Self-assembly of Zirconia Nanoparticles Via Hydrothermal Method

Synthesis, microstructure and optical characterization of zirconium oxide nanostructures

Fine Tuning of the Sizes and Phases of ZrO2 Nanocrystals

Hydrothermal Synthesis of Lead Zirconate Titanate Nearly Free-Standing Nanoparticles in the Size Regime of about 4 Nm

Sequential Occurrence of ZnO Nanopaticles, Nanorods, and Nanotips During Hydrothermal Process in a Dilute Aqueous Solution

Synthesis of Single-Crystalline Pb(Zr0.52Ti0.48)O-3 Nanocrystals by Hydrothermal Method

Synthesis and Characterization of Zirconia Nanorods

Characterization and Synthesis of Pure Zro2 Nanopowders Via Sonochemical Method

Synthesis and Characterization of Doped Nano-Sized Ceria–zirconia Solid Solutions

Phase Composition Controllable Preparation of Zirconia Nanocrystals Via Solvothermal Method

From modification to mechanism: Supercritical hydrothermal synthesis of nano-zirconia

An EXAFS Study of the Nanocrystalline Transformation of ZrO2:Y2O3(5%)

Synthesis and Characterization of Zirconium Nitride Nanopowders by Internal Gelation and Carbothermic Nitridation

Hydrothermal synthesis and characterization of nanocrystalline PZT powders

Synthesis and Pyrolysis Evolution of Glucose-Derived Hydrothermal Precursor for Nanosized Zirconium Carbide

Hydrothermal Synthesis of Weakly Agglomerated Nanocrystalline Scandia-Stabilized Zirconia