Abstract:BACKGROUND Zirconia is one of the most widely used ceramic materials for transplanting and treating caries. This study aimed to synthesize zirconium oxide (ZrO₂) nanotubes and evaluated their characteristics. MATERIAL AND METHODS Zr film was prepared using an ion plating method. Nanoarray film was constructed with anodizing. Photocatalytic properties of nnanotubes were assessed by evaluating decolorization of methyl orange. Elemental analysis and structural morphology for coatings were evaluated using x-ray analysis and scanning electron microscopy (SEM). Dimensions for layers were measured with SEM imaging. X-ray diffraction (XRD) was measured using Empyrean x-ray diffractometry. RESULTS There were irregular cavities on the surface of ZrO₂ nanotubes undergoing anodizing of 30V. Anodizing voltage of 45 V (with regular nano-pore arrays and smooth nanotube walls) and anodic oxidation duration of 60 min (ZrO₂ nanotubes clearly formed atop ZrO₂-coated substrate surface) were the optimal condition for ZrO₂ nanotube formation. TEM illustrated tube length of ZrO₂ nanotubes was approximately 2.01 μm. Nanotube diameter was 51.06 nm, and wall thickness was 13 to 14 nm. Annealed nanotubes showed an obvious crystal diffraction pattern. TEM diffraction ring showed nanotube array without obvious transistor structure before annealing, but with good crystallinity post-annealing. Increased annealing temperatures result in enhanced intensity for the monoclinic phase (400-800°C). After annealing at 600°C, the decolorization effect of ZrO₂ nanotubes on methyl orange was better than that post-annealing at 400 and 800°C. ZrO₂ nanotubes demonstrated higher microshear bond strength. CONCLUSIONS Zirconium nanotubes were successfully synthesized and demonstrated good structural characteristics, which can be applied to transplanting and treating caries.

Synthesis and Characterization of Zirconia Nanorods

Hydrothermal Synthesis and Characterization of Zirconia Nanocrystallites

Synthesis and Characterization of Monoclinic Zro2 Nanorods by A Novel and Simple Precursor Thermal Decomposition Approach

Synthesis, microstructure and optical characterization of zirconium oxide nanostructures

Preparation and Structural Properties of Zirconia Nanotubules

Nanostructured ZnO: from Monodisperse Nanoparticles to Nanorods

Monoclinic zirconium oxide nanostructures synthesized by a hydrothermal route

Synthesis and Characterization of Rutile SnO2 Nanorods

Synthesis and characterization of SnO2 nanorods

Synthesis of Spherical (30 Nm) and Rod-Like (200 Nm) Zirconia Co-Reinforced Mullite Nanocomposites

Preparation of ZnO Nanorods and Optical Characterizations

Synthesis and Characterization of Nano-sized Zirconia Powders Using Microemulsion-assisted Wet Solid State Reaction Route

Controlled Hydrothermal Synthesis of Zirconium Oxide Nanostructures and Their Optical Properties

Characterization and Synthesis of Pure Zro2 Nanopowders Via Sonochemical Method

Synthesis and Optical Characterizations of ZnO Nanorods

Preparation and characterization of ZnO nanorods

Preparation and characterization of yttria-stabilized zirconia nanotubes

Synthesis and Characterization of Zirconium Nitride Nanopowders by Internal Gelation and Carbothermic Nitridation

Preparation of a Novel Transplant Material, Zirconium Oxide (ZrO₂) Nanotubes, and Characterizations Research

Synthesis and Optical Properties of Yttria-Doped ZrO2 Nanopowders

A Novel Route for the Preparation of Ultrafine Yttria-Doped Zirconia Powders