Abstract:(ZrO2)(0.85)(REO1.5)(0.15) (RE = Sc, Y) solid solutions in a pure cubic fluorite structure with uniform grain sizes ranging from nanometers to microns have been synthesized by a Pechini-type sol-gel method, using weakly cross-linked polymers. Metal nitrates, poly( ethylene glycol) and carboxylic acids such as acetic acid and formic acid, have been utilized to make the homogeneous polymer precursor solutions. Owing to its stronger acidity and coordinating capability, formic acid seems more effective in preventing the metal hydroxides segregating from the precursor solutions than does acetic acid during the gel formation. The Sc-doped zirconia derived from the formic acid-containing gel could achieve good-crystallization in the pure cubic phase at sintering temperatures as low as 1000degreesC. Gel-calcined powders at 800degreesC are mesoporous nanoparticles with narrow size distribution, and show a cubic structure attributed to the crystallite size effect. The polymeric precursor compositions display considerable impact on the gel formation, powder reactivity, crystallization of the sintered body, and finally the ionic conductivity of the grain boundary. However, the bulk ionic conductivity is dependent on the sintering temperature and variety of the dopants, rather than on the precursor compositions. Both the bulk and grain boundary conductivities increase when the sintering temperature/density are raised.

A General Propylene Epoxide-assisted Sol-Gel Route for the Synthesis of ZrO2-SnO2 Composite Sols

Preparation of Zirconia Powders by Sol-gel Process

The Self-Catalytic Role Of Zirconium N-Propoxide In Sol-Gel Syntheses Of Zro2/Y2o3-Ceo2 Compound Powders

The Self-Catalytic Role of Zirconium N-Propoxide in Sol-Gel Syntheses of ZrO<sub>2</sub>/Y<sub>2</sub>O<sub>3</sub>-CeO<sub>2</sub> Compound Powders

Synthesis of Monolithic Zirconia with Macroporous Bicontinuous Structure Via Epoxide-Driven Sol–gel Process Accompanied by Phase Separation

Synthesis and Mechanism Research of an Ethylene Glycol-Based Sol-Gel Method for Preparing PZT Nanopowders

Preparation of macroporous zirconia monoliths from ionic precursors via an epoxide-mediated sol-gel process accompanied by phase separation

Preparation and CO 2 Capture Properties of Nanocrystalline Li 2 ZrO 3 Via an Epoxide-Mediated Sol–gel Process

Solvothermal synthesis of titania-zirconia composite

SYNTHESIS OF ZrO2 MESOPOROUS MATERIALS BY LIQUID PHASE METHOD

Properties Of Oxide Coatings On The Surface Of Zrh2 Prepared By A Sol-Gel Method With Different Precursor Concentrations

PREPARATION OF ZIRCONIA SOL BY ANION EXCHANGE METHOD FROM ZIRCONYL CHLORIDE

Synthesis of ZSM-5/SAPO-5 Composite by Two-Step Hydrothermal Crystallization Process

Chemical synthesis of nanocrystalline ZrO2-SnO2 composite powders

Preparation of Macroporous Zirconia Monoliths via Sol-Gel Process Accompanied by Phase Separation

Preparation of Li-doped ZrO2 Porous Monoliths via Sol-Gel Process Accompanied by Phase Separation

Solvothermal synthesis of sub-micron spherical zirconia particles

Sol–gel Synthesis and Electrical Properties of (zro2)0.85(reo1.5)0.15 (RE = Sc, Y) Solid Solutions

Syntheses of ZrC–SiC Nanopowder Via Sol–gel Method

A simple route to synthesize hierarchical porous ZrO2

Preparation of Zirconia Fibers via a Simple Aqueous Sol-Gel Method