Abstract:Porous carbon monoliths with defined multi-length scale pore structures, a nitrogen-containing framework, and high mechanical strength were synthesized through a self-assembly of poly(benzoxazine-co-resol) and a carbonization process. Importantly, this synthesis can be easily scaled up to prepare carbon monoliths with identical pore structures. By controlling the reaction conditions, porous carbon monoliths exhibit fully interconnected macroporosity and mesoporosity with cubic Im3m symmetry and can withstand a press pressure of up to 15.6 MPa. The use of amines in the synthesis results in a nitrogen-containing framework of the carbon monolith, as evidenced by the cross-polarization magic-angle-spinning NMR characterization. With such designed structures, the carbon monoliths show outstanding CO2 capture and separation capacities, high selectivity, and facile regeneration at room temperature. At similar to 1 bar, the equilibrium capacities of the monoliths are in the range of 3.3-4.9 mmol g(-1) at 0 degrees C and of 2.6-3.3 mmol g(-1) at 25 degrees C, while the dynamic capacities are in the range of 2.7-4.1 wt % at 25 degrees C using 14% (v/v) CO2 in N-2. The carbon monoliths exhibit high selectivity for the capture of CO2 over N-2 from a CO2/N-2 mixture, with a separation factor ranging from 13 to 28. Meanwhile, they undergo a facile CO2 release in an argon stream at 25 degrees C, indicating a good regeneration capacity.

Preparation and CO 2 Capture Properties of Nanocrystalline Li 2 ZrO 3 Via an Epoxide-Mediated Sol–gel Process

CO2 Sorption Durability of Zr-Modified Nano-CaO Sorbents with Cage-like Hollow Sphere Structure

A General Propylene Epoxide-assisted Sol-Gel Route for the Synthesis of ZrO2-SnO2 Composite Sols

Preparation of Li-doped ZrO2 Porous Monoliths via Sol-Gel Process Accompanied by Phase Separation

Preparation of macroporous Li2ZrO3 monoliths via an epoxide-mediated sol–gel process accompanied by phase separation

In situ growth of ZIF-8 nanocrystals on layered double hydroxide nanosheets for enhanced CO<sub>2</sub> capture

In situ growth of ZIF-8 nanocrystals on layered double hydroxide nanosheets for enhanced CO2 capture.

Synthesis of Monolithic Zirconia with Macroporous Bicontinuous Structure Via Epoxide-Driven Sol–gel Process Accompanied by Phase Separation

Synthesis and CO2-absorption properties of lithium zirconate

Electrochemical Performance of Nanocrystalline Li3V2(PO4)3/carbon Composite Material Synthesized by a Novel Sol–gel Method

Liquid state synthesis and CO2 sorption characteristics of lithium zirconates with different crystalline phase

Synthesis and CO2 Adsorption Characteristics of Lithium Zirconates with High Lithia Content

Fabrication of dense and porous Li2ZrO3 nanofibers with electrospinning method

Structurally Designed Synthesis of Mechanically Stable Poly(benzoxazine-co-resol)-Based Porous Carbon Monoliths and Their Application As High-Performance CO2 Capture Sorbents

Preparation of macroporous zirconia monoliths from ionic precursors via an epoxide-mediated sol-gel process accompanied by phase separation

One-step fabricated Zr-supported, CaO-based pellets via graphite-moulding method for regenerable CO2 capture

Preparation of Zirconia Powders by Sol-gel Process

Three-step Calcination Synthesis of High-Purity Li8ZrO6 with CO2 Absorption Properties.

Some influencing factor for CO2 absorption cycle-ability of lithium zirconate

Factors Influencing CO_2 Absorption by Li_2ZrO_3

Synthesis and Co2 Capture Property of High Aspect-Ratio Li2zro3 Nanotubes Arrays