Abstract:Tube overheating is the leading cause of boiler tube failures that had led to tremendous replacement and maintenance costs. Boiler tube temperature is simultaneously affected by the heating effect of hot combustion gas in the furnace and the cooling effect of steam flow in boiler tubes. Thus, prediction of tube temperature needs to include the simulations of both the gas and steam flows of the boiler in the model. To compromise the significant scale difference between the boiler furnace and tubes, a coupled model that integrates a three-dimensional (3D) CFD model describing the gas flow and combustion processes in the furnace with a one-dimensional (1D) hydrodynamic model describing the steam flow in the boiler waterwall tubes was developed in this paper. The 3D CFD and 1D hydrodynamic models are coupled by iterative data exchange of boiler heat flux and steam temperature between the two models. In this way, this coupled model can incorporate all the key parameters that strongly affect the waterwall tube temperature, including the distributions of boiler heat flux, steam temperature and the convective heat transfer coefficient of steam flow in boiler tubes. In particular, the critical effects of steam maldistribution caused by both the structure of tube network system and uneven heat absorption of parallel tubes on tube temperature can be resolved by this model. This coupled model provides the capability to predict the detailed distribution of waterwall tube temperature and locate the areas of tube overheating under different boiler operating parameters. This coupled model was employed to predict the tube temperature distribution of the spiral waterwall of a 350 MW supercritical boiler. The predicted results show that the areas having higher risk of tube overheating are located near the outlet of spiral waterwall tubes where the steam temperature is the highest and on the wall areas where the local wall heat flux is the highest. The results strengthen the necessity of incorporating both the gas and steam sides of boiler into the model for accurate prediction of waterwall tube temperature.

Study on Thermal Sensitivity of Waterwall in Once-through Boiler

Research & Development of Boiler Tube Wall Temperature Calculation System

Development and Applications of the Thermal Calculation System for Universal Industrial Boilers

Investigation on Hydrodynamic Performance and Wall Temperature of Water-Cooled Wall in 1000 MW Boiler Under Low-Load Conditions

Safety analysis of operation of water walls of a 300 MW once-through boiler in peak load operation

Steam Temperature Characteristics in Boiler Water Wall Tubes Based on Furnace CFD and Hydrodynamic Coupling Model

Numerical Study and Structural Optimization of Water-Wall Temperature-Measurement Device for Ultra-Supercritical Boiler

Numerical investigation of boiler waterwall corrosion by integrated tube temperature prediction and sulfur evolution model

Analysis of the Heating-surface Wall Temperature Characteristics of a CFB (circulating Fluidized Bed) Boiler Wing Wall

Application of Multi-Tangential Firing Technology to Settling the High Temperature Corrosion of Water Wall Tube of Boiler

Measurement and Its Error Analysis of Heat Flux in Water Wall

The hydrodynamic characteristics of embattlement shaped water wall of a 350 mw supercritical circulating fluidized bed boiler

Leakage of water-cooled wall tube in subcritical boiler

Thermal–Hydraulic Calculation and Analysis on Water Wall System of a 700 MWe Ultra-Supercritical CFB Boiler

A coupled combustion and hydrodynamic model for the prediction of waterwall tube overheating of supercritical boiler

Heat transfer characteristic of water wall and partition wall in a 600 MW CFB boiler

Effect of Circumferential Flow Non-uniformity on the Temperature Distribution of Membrane Water Wall in Supercritical Boilers and Simplified Calculation Methods

Effects of Thermal Boundary Conditions on Heat Transfer Characteristics of Supercritical Water

Modeling Analysis and Experimental Study of a Temperature-difference Type Heat Flux Meter

The Water Dynamic Safety Of Cfb Boiler With Water Cooled Square Cyclone

Research on the Water Wall Design and Hydrodynamic Characteristics of a 600 MW Supercritical Pressure CFB Boiler