Abstract:Tube overheating is the leading cause of boiler tube failures that had led to tremendous replacement and maintenance costs. Boiler tube temperature is simultaneously affected by the heating effect of hot combustion gas in the furnace and the cooling effect of steam flow in boiler tubes. Thus, prediction of tube temperature needs to include the simulations of both the gas and steam flows of the boiler in the model. To compromise the significant scale difference between the boiler furnace and tubes, a coupled model that integrates a three-dimensional (3D) CFD model describing the gas flow and combustion processes in the furnace with a one-dimensional (1D) hydrodynamic model describing the steam flow in the boiler waterwall tubes was developed in this paper. The 3D CFD and 1D hydrodynamic models are coupled by iterative data exchange of boiler heat flux and steam temperature between the two models. In this way, this coupled model can incorporate all the key parameters that strongly affect the waterwall tube temperature, including the distributions of boiler heat flux, steam temperature and the convective heat transfer coefficient of steam flow in boiler tubes. In particular, the critical effects of steam maldistribution caused by both the structure of tube network system and uneven heat absorption of parallel tubes on tube temperature can be resolved by this model. This coupled model provides the capability to predict the detailed distribution of waterwall tube temperature and locate the areas of tube overheating under different boiler operating parameters. This coupled model was employed to predict the tube temperature distribution of the spiral waterwall of a 350 MW supercritical boiler. The predicted results show that the areas having higher risk of tube overheating are located near the outlet of spiral waterwall tubes where the steam temperature is the highest and on the wall areas where the local wall heat flux is the highest. The results strengthen the necessity of incorporating both the gas and steam sides of boiler into the model for accurate prediction of waterwall tube temperature.

Effect of Circumferential Flow Non-uniformity on the Temperature Distribution of Membrane Water Wall in Supercritical Boilers and Simplified Calculation Methods

Heat Transfer to Supercritical Water in Circular Tubes with Circumferentially Non-Uniform Heating

NUMERICAL INVESTIGATION ON HEAT TRANSFER TO SUPERCRITICAL WATER FLOWING UPWARD IN A 4-M LONG BARE VERTICAL CIRCULAR TUBE

Numerical Investigation of Supercritical Water Turbulent Flow and Heat Transfer Characteristics in Vertical Helical Tubes

Numerical study on heat transfer characteris tics of supercritical water in straight and helical tubes

Numerical Verifications on Heat Transfer to Supercritical Water Flowing Upward in a 4-m Long Bare Vertical Tube

Comparisons of Supercritical Loop Flow and Heat Transfer Behavior under Uniform and Nonuniform High-Flux Heat Inputs

Effects of Thermal Boundary Conditions on Heat Transfer Characteristics of Supercritical Water

Heat transfer of supercritical pressure water in helical tubes

Heat transfer deterioration in a supercritical water channel

Numerical Investigation of Heat Transfer to Supercritical Pressure Water in Vertical Tube with Non-Uniform Heating Form

Investigation And Modeling Of The In-Tube Heat Transfer Of Fluids At Supercritical Pressure During Heating

Influences of Tube Wall on the Heat Transfer and Flow Instability of Various Supercritical Pressure Fluids in a Vertical Tube

Impact of Conjugate Heat Transfer on the Turbulence and Heat Transfer in an Upward Heated Pipe Flow at Supercritical Pressure

A coupled combustion and hydrodynamic model for the prediction of waterwall tube overheating of supercritical boiler

Experimental study on heat transfer in vertical cooling tube cooled by downward flow in the passive heat removal system of SCWR

Numerical Study on Heat Transfer and Flow Oscillations of Supercritical-Pressure Water in Helical Tubes

Heat Flux Distribution on Circulating Fluidized Bed Boiler Water Wall

Comparison Between Heat Transfer to Supercritical Water in A Smooth Tube and in an Internally Ribbed Tube

Computational Analysis of Tube Wall Temperature of Superheater in 1000 MW Ultra-Supercritical Boiler Based on the Inlet Thermal Deviation

Effect of Internal Helical-Rib Roughness on Mixed Convection Flow and Heat Transfer in Heated Horizontal Pipe Flow of Supercritical Water