Abstract:Tube overheating is the leading cause of boiler tube failures that had led to tremendous replacement and maintenance costs. Boiler tube temperature is simultaneously affected by the heating effect of hot combustion gas in the furnace and the cooling effect of steam flow in boiler tubes. Thus, prediction of tube temperature needs to include the simulations of both the gas and steam flows of the boiler in the model. To compromise the significant scale difference between the boiler furnace and tubes, a coupled model that integrates a three-dimensional (3D) CFD model describing the gas flow and combustion processes in the furnace with a one-dimensional (1D) hydrodynamic model describing the steam flow in the boiler waterwall tubes was developed in this paper. The 3D CFD and 1D hydrodynamic models are coupled by iterative data exchange of boiler heat flux and steam temperature between the two models. In this way, this coupled model can incorporate all the key parameters that strongly affect the waterwall tube temperature, including the distributions of boiler heat flux, steam temperature and the convective heat transfer coefficient of steam flow in boiler tubes. In particular, the critical effects of steam maldistribution caused by both the structure of tube network system and uneven heat absorption of parallel tubes on tube temperature can be resolved by this model. This coupled model provides the capability to predict the detailed distribution of waterwall tube temperature and locate the areas of tube overheating under different boiler operating parameters. This coupled model was employed to predict the tube temperature distribution of the spiral waterwall of a 350 MW supercritical boiler. The predicted results show that the areas having higher risk of tube overheating are located near the outlet of spiral waterwall tubes where the steam temperature is the highest and on the wall areas where the local wall heat flux is the highest. The results strengthen the necessity of incorporating both the gas and steam sides of boiler into the model for accurate prediction of waterwall tube temperature.

The hydrodynamic characteristics of embattlement shaped water wall of a 350 mw supercritical circulating fluidized bed boiler

Thermal–Hydraulic Calculation and Analysis on Water Wall System of a 700 MWe Ultra-Supercritical CFB Boiler

Study on coal combustion characteristics in a 350MW supercritical tangentially boiler

Hydrodynamics of the Water Wall in a 600 MW Supercritical Circulating Fluidized Bed Boiler With Water Cooled Panels Within the Furnace

The Water Dynamic Safety Of Cfb Boiler With Water Cooled Square Cyclone

Heat Flux Determination Based on the Waterwall and Gas–solid Flow in a Supercritical CFB Boiler

Research on the Water Wall Design and Hydrodynamic Characteristics of a 600 MW Supercritical Pressure CFB Boiler

Heat Flux Distribution on Circulating Fluidized Bed Boiler Water Wall

Heat transfer characteristic of water wall and partition wall in a 600 MW CFB boiler

Steam and Water Wall Temperature of a 600mwe Supercritical Pressure Circulating Fluidized Bed Boiler

Structure and Performance of a 600MWe Supercritical CFB Boiler with Water Cooled Panels

Steam Temperature Characteristics in Boiler Water Wall Tubes Based on Furnace CFD and Hydrodynamic Coupling Model

Hydrodynamic Characteristics of Vertical Tubes With Low Mass Flux in Supercritical Pulverized Coal Boiler

Thermal-hydraulic Calculation and Analysis on Evaporator System of a 660 MWe Ultra-Supercritical CFB Boiler

Heat transfer in a 600 Mwe supercritical circulating fluidized bed boiler with water cooled wall panels

Heat flux profile of the furnace wall of a 300MWe CFB boiler

Safety Analysis on the Water Wall in the 350 MW Supercritical CFB Boiler under Sudden Electricity Failure

Conceptual Design Of An 800mwe Supercritical Pressure Circulating Fluidized Bed Boiler And Its Performance Prediction

Investigation on Hydrodynamic Performance and Wall Temperature of Water-Cooled Wall in 1000 MW Boiler Under Low-Load Conditions

Conceptual design of a simplified 660 MW ultra-supercritical circulating fluidized bed boiler

A coupled combustion and hydrodynamic model for the prediction of waterwall tube overheating of supercritical boiler