Conceptual design of a simplified 660 MW ultra-supercritical circulating fluidized bed boiler

Junfu LV,Man ZHANG,Hairui YANG,Qing LIU,Zhiqiang LIU,Yonggang ZHAO

DOI: https://doi.org/10.13334/j.0258-8013.pcsee.2014.05.005

2014-01-01

Abstract:The design consideration of a 660 MW ultra-supercritical circulating fluidized bed (CFB) boiler was discussed. The conceptual design of simplified 660 MW ultra-supercritical CFB boiler was suggested. In this boiler, there is only one distributor to avoid the bed inventory overturn between pant-legs. All the heating surface in the loop are located in the uppers of the furnace instead of external heat exchanger. The front water wall is embattlement shape, the water wall surface is enlarged compared with that the normal one because the length of the wall is expended for the same furnace sectional area. And the height of the furnace is only 48.2 m. The secondary air nozzles are located in the trough to the furnace of the embattlement shape wall, the distance between the front wall and rear wall is decreased to improve the Oxygen diffusion in the gas solid two phase flow. There is an embattlement in the rear wall between the adjacent cyclones. And the furnace alone the width direction is divided into four units. Thus this design is unit design. The operation practices shows that the cut size of the fly ash is not upward trend when the cyclone diameter increases. This indicates that the collection efficiency of the cyclone does not decrease when the cyclone diameter increases, which proves the feasibility of the cyclone with 10.85 m diameter in this design. The structure of the simplified 660 MW supercritical CFB boiler was described, and the performance was also predicted.