Abstract:This paper investigates the pull-in dynamics of single-sided and double-sided parallel-plate (SSPP and DSPP) structures employed in MEMS devices for acceleration measurement. A lumped electromechanical model considering a variable damping coefficient and external acceleration is developed for studying their pull-in dynamical behavior. The critical pull-in displacement and pull-in voltage for both parallel-plate structures operated with external acceleration are derived based on the static and dynamical analysis of the proposed model, which are in good agreement with the experimental results. The derived closed-form solutions are shown to be capable of predicting the pull-in behavior of both parallel-plate structures in an overdamped system. Two MEMS parallel-plate structures exhibit distinct pull-in characteristics due to their distinct configurations. The commonly used SSPP structure for MEMS devices is shown to have a relatively linear response to the external acceleration in terms of the critical pull-in displacement and pull-in voltage. However, the DSPP structure exhibits much larger yet nonlinear sensitivity of both the critical pull-in displacement and the critical pull-in voltage to a small range of external acceleration, which has the potential of developing high-sensitivity accelerometers whenever the sensitivity nonlinearity is compensated. Moreover, the effects of pressure are characterized for both DSPP and SSPP devices, which affects the difference between the critical static and dynamic pull-in voltages. The SSPP structure is shown to have the critical pull-in voltage proportional to the logarithmic magnitude of the pressure, while that of the DSPP structure do not vary linearly with respect to the logarithmic magnitude of the pressure.

Self-Test Characteristics of a Micromachined Accelerometer

Analysis of the self-test characteristics of a micromachined accelerometer

Study of a Novel Micromachined Capacitive Accelerometer

A Novel Self-Test Structure for Time-Divided Closed-Loop MEMS Capacitive Accelerometer

Electrometric Method for Measuring the Mechanical Parameters of a Comb-Finger Micro-Mechanical Accelerometer

Pull-In Dynamics of Two MEMS Parallel-Plate Structures for Acceleration Measurement

Studies on Self-Testable/Self-Calibratable Capacitive Microaccelerometer with Metal Structure and High Load Capacity

Design and Realization of Comb-Finger Micromechanical Accelerometer

Design for Electrostatically Levitated Micromechanical Accelerometer

Structural Design and Testing of a Micromechanical Resonant Accelerometer

Performance of a Sensitive Micromachined Accelerometer with an Electrostatically Suspended Proof Mass

Study of self-calibrating MEMS accelerometers

A micromachined resonant accelerometer

Study on Structure and Detecting Technique of Micro-accelerometer

A Sensitive Three-Axis Micromachined Accelerometer Based on an Electrostatically Suspended Proof Mass

A Pendulous Micromachined Silicon Accelerometer

Design considerations of electrostatic forces in microaccelerometers

A Hybrid Micro-Accelerometer System with CMOS Readout Circuit and Self-Test Function

Analysis & Prevention on Pull-in Failure of Force Feedback Micro-Accelerometer after Heavy Impact

A micromachined silicon resonant accelerometer

Design, Fabrication And Levitation Experiments Of A Micromachined Electrostatically Suspended Six-Axis Accelerometer