Abstract:The ultrahigh static displacement-acceleration sensitivity of a mechanical sensing chip is essential primarily for an ultra-sensitive accelerometer. In this paper, an optimal design to implement to a single-axis MOEMS accelerometer consisting of a grating interferometry cavity and a micromachined sensing chip is presented. The micromachined sensing chip is composed of a proof mass along with its mechanical cantilever suspension and substrate. The dimensional parameters of the sensing chip, including the length, width, thickness and position of the cantilevers are evaluated and optimized both analytically and by finite-element-method (FEM) simulation to yield an unprecedented acceleration-displacement sensitivity. Compared with one of the most sensitive single-axis MOEMS accelerometers reported in the literature, the optimal mechanical design can yield a profound sensitivity improvement with an equal footprint area, specifically, 200% improvement in displacement-acceleration sensitivity with moderate resonant frequency and dynamic range. The modified design was microfabricated, packaged with the grating interferometry cavity and tested. The experimental results demonstrate that the MOEMS accelerometer with modified design can achieve the acceleration-displacement sensitivity of about 150 mu m/g and acceleration sensitivity of greater than 1500V/g, which validates the effectiveness of the optimal design.

Design and Realization of Comb-Finger Micromechanical Accelerometer

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

Monolithic Integrated Micro-Opto-Electromechanical Accelerometer Based on Michelson Interferometer Structure

Design and Simulation of A Multi-Finger Micromechanical Silicon Accelerometer

Design and Modification of a High-Resolution Optical Interferometer Accelerometer

Design and Analysis of a Multi-Finger Micromechanical Silicon Accelerometer

Critical Technologies in Design of Micromechanical Resonant Accelerometer

Design and analysis of micromechanical resonant accelerometer

Electrometric Method for Measuring the Mechanical Parameters of a Comb-Finger Micro-Mechanical Accelerometer

Design Of A High-Sensitivity Micromechanical Resonant Accelerometer With A Two-Stage Microlever

Design for Electrostatically Levitated Micromechanical Accelerometer

Structural Design and Testing of a Micromechanical Resonant Accelerometer

A micromachined resonant accelerometer

Design And Fabrication Of A Slanted-Beam Mems Accelerometer

Design & Fabrication of a MEMS Piezoresistive Accelerometer with Beam-Film Combined Structure

Verilog-A modeling and design of a micromachined capacitive accelerometer

The Modeling and Simulation of Differential Frequency Micromechanical Acceleromter

A Seismic-Grade Optical MEMS Accelerometer with Force Feedback Control

Novel Capacitive Sensing System Design of A Microelectromechanical Systems Accelerometer for Gravity Measurement Applications

Design of Micromachined Capacitive Accelerometer System

Design and realization of testing instrument applied to MEMS accelerometer sensor