Abstract:In this study, an inorganic–organic hybrid thin-film transistor (TFT) with a top-gate structure is prepared using an inorganic ZnSnO film prepared via pulse plasma deposition as the channel layer and an organic polymethyl methacrylate film prepared by the solution method as the dielectric layer. The effect of oxygen pressure during the preparation of the ZnSnO channel layer and channel-layer structure on ZnSnO TFT performance was studied. The results show that increasing the oxygen pressure during the preparation process can effectively inhibit the formation of oxygen vacancies in ZnSnO and reduce the concentration of electron carriers in ZnSnO, resulting in a reduced off current and a positive shift of the threshold voltage ( V th ) in the single-channel layer ZnSnO TFT. In addition, a high-resistivity ZnSnO layer (Lt; with a lower electron-carrier concentration) is embedded between the low-resistivity ZnSnO layer (Lb; with a higher electron-carrier concentration) and the dielectric layer to form a high-/low-resistivity double-channel-layer structure (Lt/Lb). By changing the thickness combination of Lt/Lb, the resistance of the channel layer and the number of carriers modulated by gate voltage in the channel layer can be optimized, thereby adjusting the device's on current (affecting device mobility) and key energy consumption parameters (i.e., V th and off current) to achieve independent control. Thus, the fabricated double-channel-layer ZnSnO TFT exhibits excellent performance: high mobility (3.28 cm 2 /Vs), positive V th close to 0 V (0.48 V), and on-to-off current ratio of > 10 5 .

Fabrication and Comparative Study of Top-Gate and Bottom-Gate ZnO–TFTs with Various Insulator Layers

Fabrication of Bottom-Gate and Top-Gate Transparent ZnO Thin Film Transistors

Electrical Properties of Wide Bandgap ZnMgO and Fabrication of Transparent Thin Film Transistors

A Study on the Bottom-gate ITO-stabilized ZnO Thin-Film Transistors

Fabrication And Characteristics Of Zno-Based Thin Film Transistors

The Fabrication of Thin Film Transistors with ZnO As Active Channel Layer

Amorphous InGaZnO Thin Film Transistors with Different Transparent Electrodes

Transparent Thin-Film Transistors Using ZnMgO as Dielectrics and Channel

Fabrication and performance of indium oxide based transparent thin film transistors

Fabrication and Properties of InGaZnO Thin-Film Transistors Based on a Sol–Gel Method with Different Electrode Patterns

High Performance Rf Sputtering Deposited Zno Thin-Film Transistors

Study of zinc tin oxide thin-film transistor

All-Sputtered, Flexible, Bottom-Gate Igzo/Al2o3 Bi-Layer Thin Film Transistors on Pen Fabricated by A Fully Room Temperature Process

High-Performance Flexible Tin-Zinc-Oxide Thin-Film Transistors Fabricated on Plastic Substrates

Transparent Thin-Film Transistors Based on c-Axis Oriented, Verti cally Aligned ZnO Nanorod Arrays via Solution Pro cessing

High performance reactive sputtering deposited ZnO thin-film transistors on transparent substrate

Fabrication optimization to improve performance of gallium-doped zinc oxide thin film transistors

Top-gate thin-film transistors with amorphous ZnSnO channel layers prepared by pulsed plasma deposition

The Fabrication and Ultraviolet Detecting Properties of ZnMgO-based Thin Film Transistor by Laser Molecular Beam Epitaxy

Transparent gallium doped zinc oxide thin-film transistors fabricated on glass substrate

High-performance fully transparent Ga-doped ZnO TFTs fabricated by RF Magnetron Sputtering