Abstract:With the growing need for large area display technology and the push for a faster and cheaper alternative to the current amorphous indium gallium zinc oxide (a-IGZO) as the active channel layer for pixel-driven thin film transistors (TFTs) display applications, gallium tin zinc oxide (GSZO) has shown to be a promising candidate due to the similar electronic configuration of Sn4+ and In3+. In this work TFTs of GSZO sputtered films with only a few atomic % of Ga and Sn have been fabricated. A systematic and detailed comparison has been made of the properties of the GSZO films annealed at two temperatures: 140 °C and 450 °C. The electrical and optical stabilities of the respective devices have been studied to gain more insight into the degradation mechanism and are correlated with the initial TFT performance prior to the application of stress. Post deposition annealing at 450 °C of the films in air was found to lead to a higher atomic concentration of Sn4+ in these films and a superior quality of the film, as attested by the higher film density and less surface and interface roughness in comparison to the lower annealed temperature device. These result in significantly reduced shallow and deep interface traps with improved performance of the device exhibiting VON of −3.5 V, ION/IOFF of 108, field-effect mobility (μFE) of 4.46 cm2 V−1s−1, and sub-threshold swing of 0.38 V dec−1. The device is stable under both electrical and optical bias for wavelengths of 550 nm and above. Thus, this work demonstrates GSZO-based TFTs as a promising viable option to the IGZO TFTs by further tailoring the film composition and relevant processing temperatures.

Fabrication optimization to improve performance of gallium-doped zinc oxide thin film transistors

Transparent gallium doped zinc oxide thin-film transistors fabricated on glass substrate

High-performance fully transparent Ga-doped ZnO TFTs fabricated by RF Magnetron Sputtering

Paper No P20: Effects of the Channel Thickness on Characteristics of Ga‐Doped Zinc Oxide Thin‐Film Transistors Fabricated on Glass

Room-temperature fabrication of flexible gallium-doped zinc oxide thin-film transistors on plastic substrates

High-performance transparent AZO TFTs fabricated on glass substrate

Effects of Annealing Process on Characteristics of Fully Transparent Zinc Tin Oxide Thin-Film Transistor

Effect of O2 Incorporation During the Channel Fabrication Process on Aluminum-Doped Zinc Oxide Thin-Film Transistor Characteristics

Effects of Substrate Temperature on Performance of Calcium-Doped Zinc Oxide Tfts

Low-Temperature Fabrication of Fully Transparent Igzo Thin Film Transistors on Glass Substrate

The effect of annealing temperature on the stability of gallium tin zinc oxide thin film transistors

Titanium doped Zinc-oxide based Thin Film Transistors: Optimization of the source/drain materials

Performance Enhancement of Fully Transparent Tin-Doped Zinc Oxide Thin-Film Transistors Fabricated by Sputtering at Low Temperature

Performance improvement of tin-doped zinc oxide thin-film transistor by novel channel modulation layer of indium tin oxide/tin zinc oxide

One-Step Synergistic Treatment Approach for High Performance Amorphous InGaZnO Thin-Film Transistors Fabricated at Room Temperature

Influence of Post-Annealing on Electrical Characteristics of Thin-Film Transistors with Atomic-Layer-Deposited Zno-Channel/Al2o3-Dielectric

Flexible Dual-layer Channel Gallium-doped ZnO Thin-film Transistors Fabricated on Plastic Substrates at Room Temperature

High Performance RF Sputtering Deposited AZO Thin-Film Transistors after a Post-Annealing Process

Improved Electrical Performance of Oxide Transistor Utilizing Gallium Doping Both in Channel and Dielectric Layers

Performance Improvement of Atomic Layer-Deposited ZnO/Al2O3Thin-Film Transistors by Low-Temperature Annealing in Air

Mobility Enhancement and OFF Current Suppression in Atomic-Layer-Deposited ZnO Thin-Film Transistors by Post Annealing in O2