Abstract:In this study, an inorganic–organic hybrid thin-film transistor (TFT) with a top-gate structure is prepared using an inorganic ZnSnO film prepared via pulse plasma deposition as the channel layer and an organic polymethyl methacrylate film prepared by the solution method as the dielectric layer. The effect of oxygen pressure during the preparation of the ZnSnO channel layer and channel-layer structure on ZnSnO TFT performance was studied. The results show that increasing the oxygen pressure during the preparation process can effectively inhibit the formation of oxygen vacancies in ZnSnO and reduce the concentration of electron carriers in ZnSnO, resulting in a reduced off current and a positive shift of the threshold voltage ( V th ) in the single-channel layer ZnSnO TFT. In addition, a high-resistivity ZnSnO layer (Lt; with a lower electron-carrier concentration) is embedded between the low-resistivity ZnSnO layer (Lb; with a higher electron-carrier concentration) and the dielectric layer to form a high-/low-resistivity double-channel-layer structure (Lt/Lb). By changing the thickness combination of Lt/Lb, the resistance of the channel layer and the number of carriers modulated by gate voltage in the channel layer can be optimized, thereby adjusting the device's on current (affecting device mobility) and key energy consumption parameters (i.e., V th and off current) to achieve independent control. Thus, the fabricated double-channel-layer ZnSnO TFT exhibits excellent performance: high mobility (3.28 cm 2 /Vs), positive V th close to 0 V (0.48 V), and on-to-off current ratio of > 10 5 .

A Study on the Bottom-gate ITO-stabilized ZnO Thin-Film Transistors

Study of zinc tin oxide thin-film transistor

Fabrication and performance of indium oxide based transparent thin film transistors

High Performance Rf Sputtering Deposited Zno Thin-Film Transistors

Solution-processed Coplanar Top-Gate ZnInSnO Thin Film Transistors and Bias Stability

Fabrication And Characteristics Of Zno-Based Thin Film Transistors

Chemical and Electrical Properties of Low-Temperature Solution-Processed In–Ga–Zn-O Thin-Film Transistors

High-Performance Flexible Tin-Zinc-Oxide Thin-Film Transistors Fabricated on Plastic Substrates

Performance improvement of tin-doped zinc oxide thin-film transistor by novel channel modulation layer of indium tin oxide/tin zinc oxide

Self-Aligned Top-Gate Amorphous Zinc-Tin Oxide Thin-Film Transistor with Source/Drain Regions Doped by Al Reaction

Fabrication and Properties of InGaZnO Thin-Film Transistors Based on a Sol–Gel Method with Different Electrode Patterns

Back-End-of-Line Compatible InSnO/ZnO Heterojunction Thin-Film Transistors With High Mobility and Excellent Stability

Optimization of the ZTO/GI interface of Bottom-gate Amorphous ZnSnO Thin-Film Transistor

Implementation of Self-Aligned Top-Gate Amorphous Zinc Tin Oxide Thin-Film Transistors

Studies on I-V performance enhancements of ZnO thin film transistors by vacuum treatments below 300°C

Scalability and Stability Enhancement in Self-Aligned Top-Gate Indium- Zinc-Oxide TFTs with Al Reacted Source/Drain

Vertical Channel ITO-stabilized ZnO Thin-Film Transistors

Top-gate thin-film transistors with amorphous ZnSnO channel layers prepared by pulsed plasma deposition

Low Leakage Current Vertical Thin-Film Transistors With InSnO-Stabilized ZnO Channel

High-Performance ZnO Thin-Film Transistors Prepared by Atomic Layer Deposition

Solution-Processed Low-Operating-Voltage Thin-Film Transistors with Bottom-Gate Top-Contact Structure