Abstract:Iron oxide and their different doped iron oxide catalyst have been used for decades and are considered as efficient catalysts in several synthesis schemes including synthesis of carbon nanotubes. The iron oxide of the catalyst is abundant in nature, high catalytic activity at low over potentials, stability in basic media and low cost, making it environmentally and economically attractive. Nickel doped iron oxide catalyst have not been reported in the literature. Doping of nickel over iron oxide catalyst, different percentage 1 %, 5 %, 10 % and 20 % were done by impregnation method. The samples were characterized by X‐Ray powder Diffraction (XRD), Fourier‐Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscope (SEM), Energy Dispersive X‐ray (EDX) and Thermo Gravimetric Analysis (TGA). Iron oxide and their different doped iron oxide catalyst have been used for decades and are considered as efficient catalysts in several synthesis schemes including synthesis of carbon nanotubes. The iron oxide of the catalyst is abundant in nature, high catalytic activity at low over potentials, stability in basic media and low cost, making it environmentally and economically attractive. Nickel doped iron oxide catalyst have not been reported in the literature. Doping of nickel over iron oxide catalyst, different percentage 1 %, 5 %, 10 % and 20 % were done by impregnation method. The samples were characterized by X‐Ray powder Diffraction (XRD), Fourier‐Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscope (SEM), Energy Dispersive X‐ray (EDX) and Thermo Gravimetric Analysis (TGA). Nickel doped iron oxide was used as catalyst for the synthesis of carbon nanotubes (CNTs) and doping changed the morphology of carbon nanotube (CNTs). FTIR results confirmed the doping and presence of different functional groups. Chemical vapor deposition (CVD) was carried out for the synthesis of multiwall carbon nanotubes (MWCNTs) on nickel doped iron oxide catalyst for different percentage (1 %, 5 %, 10 % and 20 %) separately. CVD assembly was carried in tube furnace and the reaction was checked at two different temperature i.e 700 °C and 750 °C and using methane and compressed natural gas (CNG) as precursors. The catalyst was activated in the furnace at 800 °C for an hour. Methane and argon were used in proportion 2 : 1 inside the furnace. SEM showed formation of CNTs at 750 °C with CNG precursor. Formation of CNTs increased with increasing doping with this CNTs was confirmed by SEM.

Effect of adding nickel to iron–alumina catalysts on the morphology of as-grown carbon nanotubes

Influence of Mesoporous Materials on the Preparation of Carbon Nanotubes

Preparation of High Purity Carbon Nano -Tubes from Ethylene Decomposition over Nanosized Iron- Based Catalysts

Catalysts effect on morphology of carbon nanotubes prepared by catalytic chemical vapor deposition in a nano-agglomerate bed

The effect of Fe and Ni catalysts on the growth of multiwalled carbon nanotubes using chemical vapor deposition

Effects of Ni Loadings on the Structure and Morphology of Carbon Nanotubes Using Nickel Doped Iron Oxide Catalysts

How reduction temperature affects the properites of carbon nanotubes growing over Fe-MgO/Al2O3 catalyst

Influence of Microstructures of Fe Catalyst Film on Growth of Aligned Carbon Nanotubes

The Role of the Catalytic Particle in the Growth of Carbon Nanotubes by Plasma Enhanced Chemical Vapor Deposition

Catalytic Chemical Vapor Deposition of Methane to Carbon Nanotubes: Copper Promoted Effect of Ni/MgO Catalysts

Study on the Features of Multiwalled Carbon Nanotube Supported Nickel Aluminum Mixed Oxides

Large-Scale Synthesis of Herringbone Carbon Nanofibers on Nonsupported Nickel Catalyst

Effect of Catalyst on Morphology of Carbon Nano-Materials Prepared in A Nano-Agglomerate Bed

Carbon nanotubes production from catalytic pyrolysis of polyethylene over nickel-based catalysts: The influence of support materials

Stoichiometric‐Ratio‐Controlled Fe and Ni Non‐noble Metal Catalysts Supported on γ‐Al2O3 for Turquoise Hydrogen and Carbon Nanotubes Production

Application of NiO deposited by atomic layer deposition for carbon nanotubes catalytic growth

Promoting effects of Fe-Ni alloy on co-production of H2 and carbon nanotubes during steam reforming of biomass tar over Ni-Fe/α-Al2O3

Synthesis of carbon nanotubes with Ni/CNTs catalyst

Interface catalytic reduction of alumina by nickle for the aluminum nanowire growth: Dynamics observed by in situ TEM

In Situ Carbon Nanotube Synthesis by the Reduction of NiO/γ-Al2O3 Catalyst in Methane

Influence of Synthesis Process on Preparation and Properties of Ni/CNT Catalyst