Abstract:Iron oxide and their different doped iron oxide catalyst have been used for decades and are considered as efficient catalysts in several synthesis schemes including synthesis of carbon nanotubes. The iron oxide of the catalyst is abundant in nature, high catalytic activity at low over potentials, stability in basic media and low cost, making it environmentally and economically attractive. Nickel doped iron oxide catalyst have not been reported in the literature. Doping of nickel over iron oxide catalyst, different percentage 1 %, 5 %, 10 % and 20 % were done by impregnation method. The samples were characterized by X‐Ray powder Diffraction (XRD), Fourier‐Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscope (SEM), Energy Dispersive X‐ray (EDX) and Thermo Gravimetric Analysis (TGA). Iron oxide and their different doped iron oxide catalyst have been used for decades and are considered as efficient catalysts in several synthesis schemes including synthesis of carbon nanotubes. The iron oxide of the catalyst is abundant in nature, high catalytic activity at low over potentials, stability in basic media and low cost, making it environmentally and economically attractive. Nickel doped iron oxide catalyst have not been reported in the literature. Doping of nickel over iron oxide catalyst, different percentage 1 %, 5 %, 10 % and 20 % were done by impregnation method. The samples were characterized by X‐Ray powder Diffraction (XRD), Fourier‐Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscope (SEM), Energy Dispersive X‐ray (EDX) and Thermo Gravimetric Analysis (TGA). Nickel doped iron oxide was used as catalyst for the synthesis of carbon nanotubes (CNTs) and doping changed the morphology of carbon nanotube (CNTs). FTIR results confirmed the doping and presence of different functional groups. Chemical vapor deposition (CVD) was carried out for the synthesis of multiwall carbon nanotubes (MWCNTs) on nickel doped iron oxide catalyst for different percentage (1 %, 5 %, 10 % and 20 %) separately. CVD assembly was carried in tube furnace and the reaction was checked at two different temperature i.e 700 °C and 750 °C and using methane and compressed natural gas (CNG) as precursors. The catalyst was activated in the furnace at 800 °C for an hour. Methane and argon were used in proportion 2 : 1 inside the furnace. SEM showed formation of CNTs at 750 °C with CNG precursor. Formation of CNTs increased with increasing doping with this CNTs was confirmed by SEM.

Effects of Ni Loadings on the Structure and Morphology of Carbon Nanotubes Using Nickel Doped Iron Oxide Catalysts

A Facile Synthesis of C-N Hollow Nanotubes As High Electroactivity Catalysts of Oxygen Reduction Reaction Derived from Dicyandiamide

Catalytic Dehydrogenation of Cyclohexane over Carbon Nanotubes-Supported Elecroless Nickel-plating Catalysts

Effect of adding nickel to iron–alumina catalysts on the morphology of as-grown carbon nanotubes

Mesoporous Carbon Materials with Ultra‐Thin Pore Walls and Highly Dispersed Nickel Nanoparticles

The effect of Fe and Ni catalysts on the growth of multiwalled carbon nanotubes using chemical vapor deposition

Catalytic Chemical Vapor Deposition of Methane to Carbon Nanotubes: Copper Promoted Effect of Ni/MgO Catalysts

One-Pot Pyrolysis Method to Fabricate Carbon Nanotube Supported Ni Single-Atom Catalysts with Ultrahigh Loading

Stoichiometric‐Ratio‐Controlled Fe and Ni Non‐noble Metal Catalysts Supported on γ‐Al2O3 for Turquoise Hydrogen and Carbon Nanotubes Production

Synthesis of carbon nanotubes and carbon onions by CVD using a Ni/Y catalyst supported on copper

Synthesis of carbon nanotubes with Ni/CNTs catalyst

Iron Oxide Nanoparticle Impregnated Mesoporous Silicas As Platforms for the Growth of Carbon Nanotubes

Looking Into How Nickel Doping Affects the Structure, Morphology, and Optical Properties of TiO 2 Nanofibers

Catalytic Performance of Iron Oxide Loaded on Electron-Rich Surfaces of Carbon Nitride

Carbon nanotubes production from catalytic pyrolysis of polyethylene over nickel-based catalysts: The influence of support materials

Synthesis Of Nickel Nanoparticles And Carbon Encapsulated Nickel Nanoparticles Supported On Carbon Nanotubes

Role of Nitrogen Doping on the Performance of Carbon Nanotube Catalysts: A Catalytic Wet Peroxide Oxidation Application

Preparation of High Purity Carbon Nano -Tubes from Ethylene Decomposition over Nanosized Iron- Based Catalysts

Electron Irradiation of Multi-Walled Carbon Nanotubes with Encapsulated Ni Particles

Effect of Catalyst on Morphology of Carbon Nano-Materials Prepared in A Nano-Agglomerate Bed

Application of NiO deposited by atomic layer deposition for carbon nanotubes catalytic growth