Abstract:Iron oxide and their different doped iron oxide catalyst have been used for decades and are considered as efficient catalysts in several synthesis schemes including synthesis of carbon nanotubes. The iron oxide of the catalyst is abundant in nature, high catalytic activity at low over potentials, stability in basic media and low cost, making it environmentally and economically attractive. Nickel doped iron oxide catalyst have not been reported in the literature. Doping of nickel over iron oxide catalyst, different percentage 1 %, 5 %, 10 % and 20 % were done by impregnation method. The samples were characterized by X‐Ray powder Diffraction (XRD), Fourier‐Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscope (SEM), Energy Dispersive X‐ray (EDX) and Thermo Gravimetric Analysis (TGA). Iron oxide and their different doped iron oxide catalyst have been used for decades and are considered as efficient catalysts in several synthesis schemes including synthesis of carbon nanotubes. The iron oxide of the catalyst is abundant in nature, high catalytic activity at low over potentials, stability in basic media and low cost, making it environmentally and economically attractive. Nickel doped iron oxide catalyst have not been reported in the literature. Doping of nickel over iron oxide catalyst, different percentage 1 %, 5 %, 10 % and 20 % were done by impregnation method. The samples were characterized by X‐Ray powder Diffraction (XRD), Fourier‐Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscope (SEM), Energy Dispersive X‐ray (EDX) and Thermo Gravimetric Analysis (TGA). Nickel doped iron oxide was used as catalyst for the synthesis of carbon nanotubes (CNTs) and doping changed the morphology of carbon nanotube (CNTs). FTIR results confirmed the doping and presence of different functional groups. Chemical vapor deposition (CVD) was carried out for the synthesis of multiwall carbon nanotubes (MWCNTs) on nickel doped iron oxide catalyst for different percentage (1 %, 5 %, 10 % and 20 %) separately. CVD assembly was carried in tube furnace and the reaction was checked at two different temperature i.e 700 °C and 750 °C and using methane and compressed natural gas (CNG) as precursors. The catalyst was activated in the furnace at 800 °C for an hour. Methane and argon were used in proportion 2 : 1 inside the furnace. SEM showed formation of CNTs at 750 °C with CNG precursor. Formation of CNTs increased with increasing doping with this CNTs was confirmed by SEM.

Synthesis Of Nickel Nanoparticles And Carbon Encapsulated Nickel Nanoparticles Supported On Carbon Nanotubes

Catalytic Dehydrogenation of Cyclohexane over Carbon Nanotubes-Supported Elecroless Nickel-plating Catalysts

Size- and Structure-Controlled Synthesis and Characterization of Nickel Nanoparticles

Mesoporous Carbon Materials with Ultra‐Thin Pore Walls and Highly Dispersed Nickel Nanoparticles

Reduction process of nickel cations anchored on carbon nanotubes

Synthesis,Characterization and Performance of Helical Carbon Nanotubes

Preparation, Characterization, and Surface Modification of Carbon-Encapsulated Nickel Nanoparticles

Scalable Production of Carbon Encapsulated Ni Nanoparticles by Water Arc Discharge: Structural and Magnetic Properties

Preparation and Characterization of a Graphite Electrode Containing Carbon Nanotubes Grown in Situ by Flame Synthesis

Synthesis and Characterization of Graphite Nanofibers Deposited on Nickel Foams

Large-scale Synthesis of Uniform Nanotubes of a Nickel Complex by a Solution Chemical Route.

Large-Scale Synthesis of Herringbone Carbon Nanofibers on Nonsupported Nickel Catalyst

Synthesis of multi-walled carbon nanotubes on nichrome and nickel by using rapid thermal processing furnace

Synthesis of carbon nanotubes with Ni/CNTs catalyst

Carbon Nanotube Synthesis and Parametric Study Using CaCO3 Nanocrystals As Catalyst Support by CVD

Synthesis Of Carbon Nanotubes By Selective Reduction Of Mixed Oxides

Synthesis of carbon nanofibers by CVD as a catalyst support material using atomically ordered Ni3C nanoparticles

Effect of adding nickel to iron–alumina catalysts on the morphology of as-grown carbon nanotubes

Effects of Ni Loadings on the Structure and Morphology of Carbon Nanotubes Using Nickel Doped Iron Oxide Catalysts

Synthesis and Characterization of Ni-C Nanoparticles by Plasma-enhanced Chemical Vapor Deposition

A new method to synthesize nickel carbide (Ni3C) nanoparticles in solution