Abstract:Iron oxide and their different doped iron oxide catalyst have been used for decades and are considered as efficient catalysts in several synthesis schemes including synthesis of carbon nanotubes. The iron oxide of the catalyst is abundant in nature, high catalytic activity at low over potentials, stability in basic media and low cost, making it environmentally and economically attractive. Nickel doped iron oxide catalyst have not been reported in the literature. Doping of nickel over iron oxide catalyst, different percentage 1 %, 5 %, 10 % and 20 % were done by impregnation method. The samples were characterized by X‐Ray powder Diffraction (XRD), Fourier‐Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscope (SEM), Energy Dispersive X‐ray (EDX) and Thermo Gravimetric Analysis (TGA). Iron oxide and their different doped iron oxide catalyst have been used for decades and are considered as efficient catalysts in several synthesis schemes including synthesis of carbon nanotubes. The iron oxide of the catalyst is abundant in nature, high catalytic activity at low over potentials, stability in basic media and low cost, making it environmentally and economically attractive. Nickel doped iron oxide catalyst have not been reported in the literature. Doping of nickel over iron oxide catalyst, different percentage 1 %, 5 %, 10 % and 20 % were done by impregnation method. The samples were characterized by X‐Ray powder Diffraction (XRD), Fourier‐Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscope (SEM), Energy Dispersive X‐ray (EDX) and Thermo Gravimetric Analysis (TGA). Nickel doped iron oxide was used as catalyst for the synthesis of carbon nanotubes (CNTs) and doping changed the morphology of carbon nanotube (CNTs). FTIR results confirmed the doping and presence of different functional groups. Chemical vapor deposition (CVD) was carried out for the synthesis of multiwall carbon nanotubes (MWCNTs) on nickel doped iron oxide catalyst for different percentage (1 %, 5 %, 10 % and 20 %) separately. CVD assembly was carried in tube furnace and the reaction was checked at two different temperature i.e 700 °C and 750 °C and using methane and compressed natural gas (CNG) as precursors. The catalyst was activated in the furnace at 800 °C for an hour. Methane and argon were used in proportion 2 : 1 inside the furnace. SEM showed formation of CNTs at 750 °C with CNG precursor. Formation of CNTs increased with increasing doping with this CNTs was confirmed by SEM.

Influence of Synthesis Process on Preparation and Properties of Ni/CNT Catalyst

Catalytic Dehydrogenation of Cyclohexane over Carbon Nanotubes-Supported Elecroless Nickel-plating Catalysts

Influence of Acid Treatments of Carbon Nanotube Precursors on Ni/Cnt in the Synthesis of Carbon Nanotubes

Influence of Mesoporous Materials on the Preparation of Carbon Nanotubes

Preparation, Structure and Electrochemical Hydrogenation of Carbon Nanotubes Supported Platinum Catalysts

Influence on (Ni-P) Electroless Composite Plating with Carbon Nanotubes

Synthesis of carbon nanotubes with Ni/CNTs catalyst

SYNTHESIS AND THE PERFORMANCE OF CARBON NANOTUBES-(Ni-P) COMPOSITES

Synthesis,Characterization and Performance of Helical Carbon Nanotubes

Effect of Catalyst on Morphology of Carbon Nano-Materials Prepared in A Nano-Agglomerate Bed

Effect of adding nickel to iron–alumina catalysts on the morphology of as-grown carbon nanotubes

Influence of the Synthesis Parameters in Carbon Nanotubes Doped with Nitrogen for Oxygen Electroreduction

Carbon Nanotube Synthesis and Parametric Study Using CaCO3 Nanocrystals As Catalyst Support by CVD

Electrochemical co-deposition of carbon nanotube/Ni composite layer

Catalysts effect on morphology of carbon nanotubes prepared by catalytic chemical vapor deposition in a nano-agglomerate bed

The Effect of Pulse Current on Electrolytically Plating Nickel as a Catalyst for Grafting Carbon Nanotubes onto Carbon Fibers via the Chemical Vapor Deposition Method

The Study of Synthesis and Electro-Catalysis for Composite-Nano Material of the C-N Embedded Pton Caron Nanotube(pt@c-N/cnt)

Influence of Preparation Modes on Pt–Ni/CNTs Catalysts Used in the Selective Hydrogenation of Cinnamaldehyde to Hydrocinnamaldehyde

Effects of Ni Loadings on the Structure and Morphology of Carbon Nanotubes Using Nickel Doped Iron Oxide Catalysts

Controllable Synthesis of CNTs Using Pd Catalyst

Low Temperature Glycerol Steam Reforming on Ni/CNTs Catalysts: the Effect of Nano-Confinement