Abstract:The nanosized Bi3.25La0.75Ti3O12 (BLT) powder was prepared by coprecipitation method with chemical grade bismuth nitrate[Bi(NO3)35H2O], lanthanum nitrate[La(NO3)3nH2O] and tetrabutyl titanate [ (C4H9O)4Ti] as raw materials, nitric acid, ethanol and deionized water as solvents, and ammonia as precipitant. The Differential thermal and thermo-gravimetric analysis (DTA/TG) and X-ray diffraction (XRD) were used to investigate the thermal behavior of BLT precursor and evaluate the phase formation of BLT. Field emission scanning electron microscopy (FESEM) was employed to observe the morphology and changes of particle size of the BLT powders calcined at different temperatures. It reveals that the bismuth oxynitrate derived from bismuth nitrate hydrolysis are not favorable for the formation of BLT phase with Bi- layer perovskite structure. The bismuth nitrate hydrolysis can be avoided by using higher concentration nitric acid solution as solvent. A single phase of BLT powder can be synthesized directly by coprecipitation of the transparent BLT precursor solution into ammonia solution under stirring, and no pyrochlore Bi2 Ti2 O7 phase is found in the powder. The particle size of the BLT powder synthesized by calcination at 700 ℃ for 2 h is not larger than 100 nm and the interaction of particles is loose with good dispersion.

PREPARATION AND SINTERING PROPERTIES OF BaTi4O9 BY CITRIC ACID GEL METHOD

Citric Acid Gel Method Synthesis, Characterization And Dielectric Properties Of Single-Phase Bati4o9

Characterization And Dielectric Properties Of Single-Phase Ba2ti9o20 Prepared By Citric Acid Gel Method

A simple approach to porous low-temperature-sintering BaTiO 3

Synthesis of Nanocrystalline 0.94Bi<sub>0.5</sub>Na<sub>0.5</sub>TiO<sub>3</sub>-0.06BaTiO<sub>3</sub> Powder by a Citrate Method

Synthesis and Sintering Behavior of BaTiO3 Prepared by Different Chemical Methods

Synthesis of Nanocrystalline 0.94Bi(0.5)na(0.5)tio(3)-0.06Batio(3) Powder by A Citrate Method

Preparation of Single-Crystalline BaTi5O11 Nanocrystals by Hydrothermal Method

Preparation of Ba2Ti9O20 by gel self-propagation process

PREPARATION OF NANOSIZED Bi3.25 La0.75 Ti3 O12 POWDER BY COPRECIPITATION METHOD

Gelation and Heat Treatment of Preparing BaNd2Ti5O14with Autocombustion Methods

Ba 4 Ti 13 O 30 Nanocrystals Prepared by Hydrothermal Method

Structure and Electrical Properties of BaTiO3 Prepared by Sol–gel Process

The Preparation of BaTi4O9 by Sol-Gel Method

Preparation of BaBi4Ti4O15 powder by sol-gel process

Gelation and heat treatment of preparing BaNd2Ti5O14 with autocombustion methods

Preparation and Properties of CaTiO_3:Zn Nanoparticles Based on Sol-Gel Method

The Preparation of Barium Ferrite Nanocrystalline Powders by A Stearic Acid Gel Method

Preparation of BaTi4O9 ceramic powders via ethylenediaminetetraacetic acid precursor

Synthesis of BaTio3 nanocrystals by stearic acid gel method

Preparation and Characterization of Citrate Sol-Gel Derived Ba(Zr,Ti)O3 Ceramics with Al2O3 Addition