Abstract:Ba0.7Sr0.3TiO3 ceramics have excellent electrical performance and wide applications in sensors, capacitors, dynamic random access memory, and so on. High-quality Ba0.7Sr0.3TiO3 powders preparation is the premise and basis for obtaining Ba0.7Sr0.3TiO3 ceramics with excellent properties. Monodispersed Ba0.7Sr0.3TiO3 powders were synthesized using a novel ultrasonic-driven polycondensation nonaqueous precipitation method with tetrabutyl titanate, anhydrous barium acetate, and anhydrous strontium acetate as precursor materials and glycol as the solvent. Ultrasonic irradiation promotes the polycondensation of raw materials; Ba–O–Ti and Sr–O–Ti bonds form in the precipitate, facilitating low-temperature synthesis of Ba0.7Sr0.3TiO3 at 550 °C. Ultrasonic irradiation also assists in the monodispersing of precipitates and BST powders and low-temperature sintering, and considerable properties of Ba0.7Sr0.3TiO3 ceramics. The Ba0.7Sr0.3TiO3 powder and ceramic particle sizes are approximately 30–50 nm and 100–150 nm, respectively. The proposed ultrasonic-driven polycondensation nonaqueous precipitation method is expected to be widely used for preparation of ceramic powders.

Preparation of BaTi4O9 ceramic powders via ethylenediaminetetraacetic acid precursor

Preparation of Ba6−3xNd8+2xTi18O54 Via Ethylenediaminetetraacetic Acid Precursor

Synthesis of Ba 6-3x Nd 8+2x Ti 18 O 54 ceramic powders via citric acid precursor

Synthesis of Ba<sub>6-3x</sub>Nd<sub>8+2x</sub>Ti<sub>18</sub>O<sub>54</sub> ceramic powders via citric acid precursor

PREPARATION AND SINTERING PROPERTIES OF BaTi4O9 BY CITRIC ACID GEL METHOD

A simple approach to porous low-temperature-sintering BaTiO 3

Preparation and Properties of BaTiO3 Ceramics from the Fine Ceramic Powder

Citric Acid Gel Method Synthesis, Characterization And Dielectric Properties Of Single-Phase Bati4o9

Characteristics of Ba 6−3 x Nd 8+2 x Ti 18 O 54 microwave dielectric ceramics derived from ethylenediaminetetraacetic acid precursor

Characteristics of Ba<sub>6−3<i>x</i></sub>Nd<sub>8+2<i>x</i></sub>Ti<sub>18</sub>O<sub>54</sub> microwave dielectric ceramics derived from ethylenediaminetetraacetic acid precursor

Preparation and Characterizations of Nanosized BaTiO3 Ceramic Powder

Progress on Preparation Technology of Barium Titanate Powder Used in Electronic Ceramic

Dielectric Properties of BaTiO3 Based Ceramics Prepared from Nano-powders

Ba 4 Ti 13 O 30 Nanocrystals Prepared by Hydrothermal Method

Formation mechanism of BaTiO3nanocrystalline synthesized at room temperature

Citrate Solution Combustion Derived Ba2Ti9O20 Ceramics

Ultrasonic-driven polycondensation nonaqueous precipitation synthesis of Ba0.7Sr0.3TiO3 ceramics

Synthesis of BaTi2O5 Nanopowders by Sol–Gel Method and the Dielectric Properties of the Ceramics

Preparation of (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C high‐entropy ceramic nanopowders via liquid‐phase precursor

Preparation for BaTiO3 Nano-crystalline Powder and Study on the Sintering Characteristics of Ceramic

Hydrothermal synthesis of high-purity BaTiO3 powders: control of powder phase and size, sintering density, and dielectric properties