Abstract:A single-stage Stirling-type pulse tube cryocooler (PTC) has recently been designed using the REGEN modeling software developed at NIST Boulder. REGEN 3.2. The REGEN-based approach is based on a finite difference method to solve the mass, energy, and momentum conservation equations, used to optimize the regenerator. The regenerator operates at a charge pressure of 2.0 - 2.5 MPa and a frequency of 60 Hz. According to the REGEN3.2 calculation, a regenerator with a length of 45 mm and a diameter of 15 mm is capable of providing a cooling power above 5 W. An inertance tube comprised of two sections is used to regulate the phase between the pressure and mass flow rate at the hot end of the pulse tube. Its geometry is based on a transmission line model, named INERTANCE, developed by Radebaugh of NIST. The single-stage pulse tube cryocooler built according to the above calculation achieved the lowest temperature of 57.0 K, and a cooling capacity of 5.0 W at 79.1 K. This performance agrees well with the design prediction. Furthermore, the object-oriented software Sage has been used to simulate the pulse tube cryo- cooler performance after running the experiment. The results compare well with the experiment and provide the opportunity for further optimization of the inertance tube.

Performance simulation and experiment of regenerator for a high-power single-stage pulse tube cooler

Performance analysis of a micro-scale pulse tube cryocooler based on optical fiber regenerator

Simulation and performance analysis of fiber-based regenerator in a pulse tube cryocooler

EXPERIMENTAL RESEARCH OF THERMAL-COUPLED VERSION HIGH FREQUENCY TWO-STAGE PULSE TUBE COOLER

Performance study on regenerator of G-M type single stage pulse tube cooler

Performance Study of a Single-Stage Pulse Tube Cooler at 10 K

Experimental Investigation of Regenerator Matrices on Performance of Pulse Tube Cooler

Performance of a Pulse Tube Cryocooler with Two Separate Stages using 3He in the Second Stage

Regenerator performance improvement of a single-stage pulse tube cooler reached 11.1 K

Performance of a pulse tube cryocooler with two separate stages using He-3 in the second stage

Therotical and experimental study on a 120 Hz single stage pulse tube cryocooler

Performance study of a single-stage pulse tube cooler below 13 K

Improvement of a Stirling type two-stage pulse tube cryocooler

Theoretical and Experimental Study on a Pulse Tube Cryocooler Driven with a Linear Compressor

Influence of Input Acoustic Power on Regenerator’s Performance

Experimental study on a three-stage cascade pulse tube cryocooler with transmission tube

Study on High Frequency Two-Stage Pulse Tube Refrigeration at 35 K: Part I. Theoretical Analysis

Simulation and experimental investigation of single stage high power stirling-type pulse tube cryocooler

A single-stage GM-type pulse tube cryocooler operating at 10.6 K

Experimental Investigation of Hybrid Regenerator Fillings with High Thermal Conductance in High Power Pulse Tube Cryocoolers

Study on High Frequency Two-Stage Pulse Tube Refrigeration at 35 K: Part Ⅱ. Experimental Verification