Abstract:This work presents an SU-8 surface micromachining process using amorphous silicon as a sacrificial material, which also incorporates two metal layers for electrical excitation. SU-8 is a photo-patternable polymer that is used as a structural layer for MEMS and microfluidic applications due to its mechanical properties, biocompatibility and low cost. Amorphous silicon is used as a sacrificial layer in MEMS applications because it can be deposited in large thicknesses, and can be released in a dry method using XeF2, which alleviates release-based stiction problems related to MEMS applications. In this work, an SU-8 MEMS process was developed using α-Si as a sacrificial layer. Two conductive metal electrodes were integrated in this process to allow out-of-plane electrostatic actuation for applications like MEMS switches and variable capacitors. In order to facilitate more flexibility for MEMS designers, the process can fabricate dimples that can be conductive or nonconductive. Additionally, this SU-8 process can fabricate SU-8 MEMS structures of a single layer of two different thicknesses. Process parameters were optimized for two sets of thicknesses: thin (5–10 µm) and thick (130 µm). The process was tested fabricating MEMS switches, capacitors and thermal actuators.

A Surface Micromachining Process Utilizing Dual Metal Sacrificial Layer for Fabrication of RF MEMS Switch

Novel Process for Fabrication of RF MEMS Switch with High Mechanical Reliability

Copper-Based Multimetal-Contact Rf Mems Switch

Implementation of Highly Reliable Contacts for RF MEMS Switches

Effect of Dielectric Layer Surface Roughness on the Isolation of an RF MEMS Switch

A Surface Micromachining Process for Suspended RF-MEMS Applications Using Porous Silicon

Development of an SU-8 MEMS process with two metal electrodes using amorphous silicon as a sacrificial material

Improving Performance of the Metal-to-metal Contact RF MEMS Switch with a Pt–Au Microspring Contact Design

Novel Multicontact Radio Frequency Microelectromechanical System Switch in High-Power–handling Applications

Design and Analysis of a Lateral Lateral DC-Contact MEMS RF Switch with High Performance

AFM Tip-Based Fabrication of Silicon Nanostructures with Reduced Subsurface Amorphous Layers

Design of A Novel Bulk Micro-Machined Rf Mems Switch

Study of Fabrication Process of A Micro-Electrostatic Switch and Its Application to A Micromechanical V-F Converter

Design and fabrication of X-band capacitive MEMS switches

Fabrication of A Nanoelectromechanical Switch Using A Suspended Carbon Nanotube

Fabrication of a Micromachined Capacitive Switch Using the CMOS-MEMS Technology

The key technologies in silicon based microwave and RF MEMS device fabrication

Study on the application of silicide in surface micromachining

Power Handling Capability Improvement of Metal-Contact RF MEMS Switches by Optimized Array Configuration Design of Contact Dimples

Temperature Effects in Packaged RF MEMS Switches with Optimized Gold Electroplating Process

Integration of Electrodeposited Ni-Fe in MEMS with Low-Temperature Deposition and Etch Processes