Abstract:Intrinsic roughness of solid surfaces causes a series of inevitable shortcomings in the use of mechanical electrical contacts, among which one of the most fatal is the repulsive electrodynamic force arising from high currents. A large contact force coming from a heavy holding mechanism helps to suppress the repulsive effect whereas the mechanism consumes energy and remains to be challenging for a compact switching device. Here, a liquid metal (LM) bridge is introduced to wet solid electrodes to eliminate contact issues. Four instability patterns induced by the electromagnetic pinch effect are identified to characterize LM bridge’s response to high currents. Simulation results reveal that an inner vortex caused by uneven distributions of current density and electrodynamic volume force leads to the rupture of a necked LM bridge. With a uniform structure, a cylindrical LM bridge is proved to be robust with respect to an impulse current higher than 10 kA, exceeding a commercial compact relay by a factor of more than 10 in terms of current withstand performance. Our research facilitates compact and energy-saving switch equipment and has a potential to realize arbitrary desired levels of high current withstand without the use of a holding mechanism. This paper also offers deep insights into the high current applications of LM from the perspective of fluid related physical mechanisms.

Power Handling Capability Improvement of Metal-Contact RF MEMS Switches by Optimized Array Configuration Design of Contact Dimples

DISTRIBUTED MULTICONTACT RF MEMS SWITCH FOR POWER HANDLING CAPABILITY IMPROVEMENT

Power Handling Capability Enhanced RF MEMS Switch Using Modified-Width Cantilevers Structure

Intermodulation Distortion in MEMS Capacitive Switches under High RF Power

Improving Performance of the Metal-to-metal Contact RF MEMS Switch with a Pt–Au Microspring Contact Design

Implementation of Highly Reliable Contacts for RF MEMS Switches

Novel Multicontact Radio Frequency Microelectromechanical System Switch in High-Power–handling Applications

Study on RF MEMS Switch with Four Parallel Ohm Contacts for Power Handling Enhancement

Design and Analysis of a Lateral Lateral DC-Contact MEMS RF Switch with High Performance

Design and Experimental Validation of A Restoring Force Enhanced Rf Mems Capacitive Switch with Stiction-Recovery Electrodes

Improved Working Properties of RF MEMS Switch by Pre-Injecting Charges into the Dielectric Layer

Novel Process for Fabrication of RF MEMS Switch with High Mechanical Reliability

Scalable Contact-Capacitive MEMS Switches with High Capacitance Ratio for Millimeter-Wave Applications

Electro-thermally actuated RF MEMS switch for wireless communication.

Multi-contact Radiofrequency Microelectromechanical Systems Switch with Power Divider/combiner Structure for High Power Applications

A Packaged 2×2 Switch Array for Power Handling and Isolation Improvement

An Analytical Model for High Performance Capacitive RF MEMS Switch Design

Robust Electrical Contacts Integrating a Liquid Metal Bridge for Mechanical Switches

Design, Simulation and Fabrication of a Novel Contact-Enhanced MEMS Inertial Switch with a Movable Contact Point

Design and Fabrication of DC to 30 GHz DC-contact Shunt RF MEMS Switch

Developing RF MEMS Switches Technology