Abstract:With the advent and development of power semiconductor switches like IGBT or MOSFET, high-speed switching devices have sprung up and sped up dynastic response of converters. However, these devices in operation will produce very large dv/dt and di/dt, which result in sever electromagnetic interference(EMI). In a variable-frequency drive(VFD) system, due to the coupling common-mode(CM) noise, communication between programmable logic controller(PLC) and VFD will be affected by CM current at the motor side if communication cables get too close to the motor ones. This paper emphatically analyzes the effect of common-mode interference on communication performance of a motor drive system. It introduces the generation mechanism of CM voltage and current at the motor side in a VFD system first and briefly illustrates how it couples to the communication cables. At the same time, some certain influence factors of CM current in communication system are respectively explained. Then it elaborates the detailed mechanism how CM current on communication cables affects the error rate which is employed to evaluate the communication quality. Besides, the numerical relationship between CM current on communication cables and the error rate is also discussed and confirmed by series of experiments. Finally, some software or hardware solutions are put forward to achieve the aim of interference suppression and decreasing the error rate when CM current on communication cables is constant.

Characteristics of Common-Mode Conducted Current in Electric Vehicle

Modeling of Common-Mode Current in Motor Cable of Inverter-Fed Motor Drive System

Propagation features of conducted emi noise in electirc vehicle

Modeling and Evaluation of Common-Mode EMI Coupling Through Converter Chassis in Metro Traction System

A method for attenuation of common-mode current in electric vehicles

Estimation of Common-Mode Current Coupled to the Communication Cable in a Motor Drive System

Influence of Motor Cable on Common-Mode Currents in an Inverter-Fed Motor Drive System

Modeling And Evaluation Of Common-Mode Interference Coupling Effects On Sensitive Cable In Motor Drive System

System-Level Conducted EMI Model for SiC Powertrain of Electric Vehicles

Common Mode Interference Modeling and Measurement for Cascaded Photovoltaic Grid-Connected System Module

Influence of System Layout on CM EMI Noise of SiC Electric Vehicle Powertrains

Modeling And Characterization Of Incomplete Shielding Effect Of Gnd On Common-Mode Emi Of A Power Converter

A Fast EMI Model Based on Equivalent Interference Sources in Medium-Voltage Cascaded H-Bridge System

Analysis of Cable Parameters on the Real Chassis by Measurement

Characteristics of SiC inverter powertrains on common-mode EMI noise

Effect of Common-Mode Interference on Communication Performance of a Motor Drive System

Electromagnetic Conductive Interference Characteristics in Driving System of Fuel Cell Bus

Modeling and Suppression of Electromagnetic Interference Noise on Motor Resolver of Electric Vehicle

Circuit Prediction Model of Electric Field Emission of a Vehicle-mounted Three-phase DC/AC Inverter

Systematic Analysis of Conducted Electromagnetic Interferences for the Electric Drive System in Electric Vehicles

Modeling And Simulation For Conducted Common-Mode Current In Switching Circuits