Abstract:With the advent and development of power semiconductor switches like IGBT or MOSFET, high-speed switching devices have sprung up and sped up dynastic response of converters. However, these devices in operation will produce very large dv/dt and di/dt, which result in sever electromagnetic interference(EMI). In a variable-frequency drive(VFD) system, due to the coupling common-mode(CM) noise, communication between programmable logic controller(PLC) and VFD will be affected by CM current at the motor side if communication cables get too close to the motor ones. This paper emphatically analyzes the effect of common-mode interference on communication performance of a motor drive system. It introduces the generation mechanism of CM voltage and current at the motor side in a VFD system first and briefly illustrates how it couples to the communication cables. At the same time, some certain influence factors of CM current in communication system are respectively explained. Then it elaborates the detailed mechanism how CM current on communication cables affects the error rate which is employed to evaluate the communication quality. Besides, the numerical relationship between CM current on communication cables and the error rate is also discussed and confirmed by series of experiments. Finally, some software or hardware solutions are put forward to achieve the aim of interference suppression and decreasing the error rate when CM current on communication cables is constant.

Modeling And Evaluation Of Common-Mode Interference Coupling Effects On Sensitive Cable In Motor Drive System

Estimation of Common-Mode Current Coupled to the Communication Cable in a Motor Drive System

Modeling of Common-Mode Current in Motor Cable of Inverter-Fed Motor Drive System

Effect of Common-Mode Interference on Communication Performance of a Motor Drive System

Modeling and Evaluation of Common-Mode EMI Coupling Through Converter Chassis in Metro Traction System

Evaluation of Communication Error Rate Induced by Common-mode Interference of a Motor Drive System

Influence of Motor Cable on Common-Mode Currents in an Inverter-Fed Motor Drive System

Modeling of Conducted EMI in Motor Drive System Based on Double Pulse Test and Impedance Measurement

Modeling And Characterization Of Incomplete Shielding Effect Of Gnd On Common-Mode Emi Of A Power Converter

Time-Domain Investigation on Cable-Induced Transient Coupling Into Metallic Enclosures

Modeling and Suppression of Electromagnetic Interference Noise on Motor Resolver of Electric Vehicle

Common Mode Interference Modeling and Measurement for Cascaded Photovoltaic Grid-Connected System Module

Numerical Characterization And Evaluation Of Esd Induced Field And Coupling On Interconnection Cable

Modeling of Common-Mode Impedance of an Inverter-Fed Induction Motor from Online Measurement

Simulation Analysis of Grounding Characteristics of Cable Based on ATP-EMTP

State Influence of Adjacent Conductors Distributed Around Tested Channel in High-Speed Connector on Electromagnetic Measurement

Multi-Conductor Electromagnetic Coupling Model for Sensitive Wires Subject to Driven Wire in Complex Electronic Systems

Electromagnetic Coupling Estimation Based on Hybrid Equivalent Dipoles and Field-Circuit Models

Characteristics of Common-Mode Conducted Current in Electric Vehicle

Time-frequency Characteristics Research of Common Mode Current in PWM Motor System

Application of Integrated Transmission Line Modeling and Behavioural Modeling on Electromagnetic Immunity Synthesis