Abstract:In a variable speed drive (VSD) system, high-frequency switching of power devices will cause large common-mode (CM) voltage during operation. While the CM voltage acts on the parasitic capacitance of the system, it will generate serious CM current on the motor side. It is necessary to model the VSD system so as to analyze and forecast the CM current theoretically. However, an essential condition of modeling CM current is to extract the CM impedance on the motor side of the system. In this paper, a novel extraction method for the CM impedance of an inverter-fed induction motor is proposed. First of all, time-domain waveforms of the CM voltage and current on the motor side of the VSD system are measured, and then mathematical calculations are performed to obtain the spectrum characteristics of the CM impedance on the motor side of the system. Compared to the traditional extraction methods of the impedance parameter by an impedance measurement or numerical calculation, the method proposed in this paper does not require laborious modeling of the motor or cable, and the extraction process is much simpler and easier. Moreover, in traditional methods, the motor impedance parameters are usually obtained in a nonworking state, while the proposed extraction method can be conducted in working state. Thus, the CM impedance extracted by the proposed method will be more accurate. Through comparing measurement and the simulation results of the CM current on motor side, the proposed CM impedance extraction method for an inverter-fed induction motor is validated.

Modeling of Common-Mode Current in Motor Cable of Inverter-Fed Motor Drive System

Influence of Motor Cable on Common-Mode Currents in an Inverter-Fed Motor Drive System

Extraction of Common-Mode Impedance of an Inverter-Fed Induction Motor

Modeling And Evaluation Of Common-Mode Interference Coupling Effects On Sensitive Cable In Motor Drive System

Estimation of Common-Mode Current Coupled to the Communication Cable in a Motor Drive System

Modeling of Common-Mode Impedance of an Inverter-Fed Induction Motor from Online Measurement

Effect of Common-Mode Interference on Communication Performance of a Motor Drive System

Modeling and Evaluation of Common-Mode EMI Coupling Through Converter Chassis in Metro Traction System

Modeling of Conducted EMI in Motor Drive System Based on Double Pulse Test and Impedance Measurement

Time-frequency Characteristics Research of Common Mode Current in PWM Motor System

High-Frequency Modeling and Filter Design for PWM Drives with Long Cables

High-frequency Electric-Motor Modelling for Conducted CM Current Prediction in Adjustable Speed Drive System

Influence of Cable Insulation Structure on Terminal Over-Voltage of Inverter-Fed Motor

High-frequency Modelling of Permanent Magnet Synchronous Motor with Star Connection

Characteristics of Common-Mode Conducted Current in Electric Vehicle

Investigation of Analytical Models for Surface-Mounted Permanent Magnet Motor Using Voltage Source Inverter

Analysis and Utilization of Common-mode Voltage in inverters for Power Supply

High-frequency modeling based EMC performance improvement of power supplies in inverters

Comparison of long cable impedances using multiphysics and equivalent circuit models

Prediction Model of Conducted Common-Mode EMI in PWM Motor Drive System

Common mode far field radiation mechanisms and prediction of a buck converter with cables based on common mode voltage mutation method