Abstract:In a variable speed drive (VSD) system, high-frequency switching of power devices will cause large common-mode (CM) voltage during operation. While the CM voltage acts on the parasitic capacitance of the system, it will generate serious CM current on the motor side. It is necessary to model the VSD system so as to analyze and forecast the CM current theoretically. However, an essential condition of modeling CM current is to extract the CM impedance on the motor side of the system. In this paper, a novel extraction method for the CM impedance of an inverter-fed induction motor is proposed. First of all, time-domain waveforms of the CM voltage and current on the motor side of the VSD system are measured, and then mathematical calculations are performed to obtain the spectrum characteristics of the CM impedance on the motor side of the system. Compared to the traditional extraction methods of the impedance parameter by an impedance measurement or numerical calculation, the method proposed in this paper does not require laborious modeling of the motor or cable, and the extraction process is much simpler and easier. Moreover, in traditional methods, the motor impedance parameters are usually obtained in a nonworking state, while the proposed extraction method can be conducted in working state. Thus, the CM impedance extracted by the proposed method will be more accurate. Through comparing measurement and the simulation results of the CM current on motor side, the proposed CM impedance extraction method for an inverter-fed induction motor is validated.

A method for attenuation of common-mode current in electric vehicles

Modeling of Common-Mode Current in Motor Cable of Inverter-Fed Motor Drive System

Characteristics of Common-Mode Conducted Current in Electric Vehicle

Modeling and Evaluation of Common-Mode EMI Coupling Through Converter Chassis in Metro Traction System

Propagation features of conducted emi noise in electirc vehicle

Elimination of Common-Mode Choke Saturation Caused by Self-Resonance of the EMI Filter in a Variable-Frequency Drive System

Influence of Motor Cable on Common-Mode Currents in an Inverter-Fed Motor Drive System

Extraction of Common-Mode Impedance of an Inverter-Fed Induction Motor

A Systematic Design and Optimization Technique for the Suppression of EMI Common Mode (CM) Noise

Estimation of Common-Mode Current Coupled to the Communication Cable in a Motor Drive System

Modeling And Evaluation Of Common-Mode Interference Coupling Effects On Sensitive Cable In Motor Drive System

Modeling and Suppression of Electromagnetic Interference Noise on Motor Resolver of Electric Vehicle

An Experimental Study Of Common- And Differential-Mode Active Emi Filter Compensation Characteristics

Magnetic Coupling Common Mode Conducted EMI Analysis and Improvement in a Boost Converter

Analysis and Reduction of Common Mode Current of the Transformer in a Full-Bridge LLC Battery Charger

Effect of Common-Mode Interference on Communication Performance of a Motor Drive System

Circuit Prediction Model of Electric Field Emission of a Vehicle-mounted Three-phase DC/AC Inverter

An active cancellation method for the common mode current of the three-phase PWM motor drives

Common mode far field radiation mechanisms and prediction of a buck converter with cables based on common mode voltage mutation method

Modeling of Common-Mode Impedance of an Inverter-Fed Induction Motor from Online Measurement

Analysis and Utilization of Common-mode Voltage in inverters for Power Supply