Abstract:In recent years, wireless charging technology for electric vehicles has gained significant attention. To accurately analyze the distribution characteristics of the electromagnetic field during the wireless charging process of electric vehicles, a finite element-based electromagnetic analysis method was employed. Applied in the commercial simulation software, the electromagnetic environment of the resonant coil and electric vehicle model was simulated under high-power charging conditions, resulting in an overall electromagnetic field distribution for the electric vehicle. The results indicated that within the coil region, the magnetic induction intensity in the central area of the coil was zero, and it increased as the distance from the center of the coil grew. Outside the coil region, the magnetic induction intensity gradually decreased. The electric field intensity of the resonant coil was maximum in the central area of the coil, and it weakened as the distance from the center of the coil increased. When a magnetic shielding resonant coil was used, the electromagnetic field was confined between the shielding materials, and the magnetic field rapidly attenuated on both sides of the magnetic shield. The electromagnetic field energy of the electric vehicle body was mainly concentrated at the bottom of the vehicle near the coil. When the coil was located in the front of the car body, the maximum electric field intensity distribution in the car body was 8.50 V/m, and the maximum magnetic induction intensity was 0.024 μT. When the coil was located in the middle of the car body, the maximum electric field intensity was 2.31 V/m, the maximum magnetic induction intensity was 0.019 μT. As the distance from the coil position increased, the energy weakened.

Circuit Prediction Model of Electric Field Emission of a Vehicle-mounted Three-phase DC/AC Inverter

Modeling of Common-Mode Current in Motor Cable of Inverter-Fed Motor Drive System

Electromagnetic Radiation Mechanism Analysis and Field Strength Prediction of an Elementary Digital Inverter with Cables

Reducing Extended Magnetic Stray Field in Wireless Charging Systems of Electric Vehicles

A Fast EMI Model Based on Equivalent Interference Sources in Medium-Voltage Cascaded H-Bridge System

Common mode far field radiation mechanisms and prediction of a buck converter with cables based on common mode voltage mutation method

Modeling and prediction of conducted EMI in on-board charging system of electric vehicle

Modeling of Magnetic Field in Low-Voltage Circuit Region of Medium-Voltage H-Bridge Module

Modeling and Prediction of Radiated Electromagnetic Interference for DC-DC Power Converter

System-Level Conducted EMI Model for SiC Powertrain of Electric Vehicles

Inclusion of Frequency Dependences into Prediction Model of Conducted Electromagnetic Emissions for a VFD Motor System

Mechanism Model and Prediction Method of Common Mode Radiation for a Nonisolated Very-High-Frequency DC–DC Converter with Cables

Far-Field Radiation Prediction and Analysis of a Power Converter with V-Shaped Flat Cables Based on PEEC

Influence of Motor Cable on Common-Mode Currents in an Inverter-Fed Motor Drive System

EMI Model of Air-conditioning Outdoor Machines

Electromagnetic field simulation modeling method and distribution characteristics of electric vehicle wireless charging system

Influence of System Layout on CM EMI Noise of SiC Electric Vehicle Powertrains

Common Mode Far-field Radiation Prediction of V-shaped Cables Based on Retarded Partial Element Equivalent Circuit Method

Modeling and Prediction of Low-frequency Radiated EMI for a SiC Motor Drive System

Propagation features of conducted emi noise in electirc vehicle

Systematic Analysis of Conducted Electromagnetic Interferences for the Electric Drive System in Electric Vehicles