Abstract:This paper investigates the conducted electromagnetic interference (EMI) characteristics of an on-board multiplexing converter that utilizes paralleled silicon carbide (SiC) devices to achieve high efficiency and high-power density for the application in electric vehicles (EVs) and plug-in hybrid electric vehicles (PHEVs). The multiplexing converter can operate as a three-phase interleaved DC/DC converter with a peak output power of 60 kW or an integrated two-stage non-isolated on-board charger (OBC) with an output power of 6.6 kW. The novelty of this paper is that it reveals that in the DC/DC mode the series resonance between the input negative lead parasitic inductance and the high frequency transmission line effects of the input power inductor will increase the conducted EMI levels, which can be mitigated by optimizing the winding methods of the power inductor or by adding a small capacitor, and reveals that in the non-isolated OBC mode the shielded cable on the battery-side will increase the grid-side EMI in the low frequency ranges, which can be suppressed by integrated installation of EMI filters without affecting the system power density. Firstly, parasitic parameters of the components of the multiplexing converter, such as the power inductors, the SiC MOSFETs and the shielded cables, are extracted and validated with impedance measurements, and the corresponding equivalent circuit models are established. Then, the conducted EMI simulation models of the multiplexing converter in different working modes are established. The influence of different interference sources and different parasitic parameters on the system EMI characteristics are analyzed, and the effective EMI suppression measures are given without affecting the system power density. Finally, the conducted EMI characteristics of the multiplexing converter and the effectiveness of the proposed EMI suppression measures are tested and verified through experiments.

Magnetic Coupling Common Mode Conducted EMI Analysis and Improvement in a Boost Converter

Design And Optimizations Of Solenoid Magnetic Structure For Inductive Power Transfer In Ev Applications

Modeling and Evaluation of Common-Mode EMI Coupling Through Converter Chassis in Metro Traction System

Double-Sandwich Magnetic Coupling Structure Design for Dual-LCL Wireless Charging System in EV Applications

Magnetic Integration Structure for Two-Stage DC-DC Converters

Identification and Model of Near Field Magnetic Coupling in A Pfc Converter

External Magnetic Field Minimization for the Integrated Magnetics in Series Resonant Converter

Model of near-field coupling of conducted electromagnetic interference from Boost converter

Modeling and Design of Integrated Inductor and Transformer Considering Superposed Flux Density in On-Board-Charger

A Systematic Design and Optimization Technique for the Suppression of EMI Common Mode (CM) Noise

Analysis and Reduction of Common Mode Current of the Transformer in a Full-Bridge LLC Battery Charger

Near Field Coupling Effects on Conducted Emi in Power Converter

Analysis the inductive coupling effects on the differential mode EMI in power converter

Suppressing Methods of Common-Mode Noise in LLC Resonant DC-DC Converters

High-Density Planar Integrated Magnetics with Two-Sided Merged Inductor Windings and Integrated Cores for Resonant DC/DC Converter

Experimental Research of the Effect of the Near-field Inductive Couplings on Differential Mode EMI of a Converter

Conducted EMI Investigation of a SiC-Based Multiplexing Converter for EV/PHEV

The Engineering Design of Contactless Emergency Power Supply in Maglev

ANALYSIS ON THE EMI EFFECT OF STRAY MAGNETIC FIELD FROM MAIN CIRCUIT OF A PFC SWITCHED MODE POWER SUPPLY

A novel and simple approach to suppress common-mode EMI in power converters

Design and Performance Analysis of New Coupling Magnetic Core Structure for Dynamic Wireless Charging System of Electric Vehicle