Abstract:The LLC resonant converter used in high-power situations suffers from the problems of high conduction loss and current stress, which can be solved using input-parallel output-parallel (IPOP)-connected converter modules. However, this leads to a multiple increase in the number of magnetic components, which reduces power density. Magnetic integration technology is an effective way to reduce the volume of converters. Currently, the magnetic integrated transformer based on EE-type cores is widely used to realize miniaturization, and it uses leakage inductance instead of resonant inductance to improve power density. However, leakage inductance is difficult to control, and the external radiated magnetic field will produce serious eddy current loss and electromagnetic interference. This article proposes a novel double B-type magnetic integrated transformer, which can integrate the magnetic components of two LLC resonant converters simultaneously and where the resonant inductances are wound independently. The structure contains four low reluctance branches, which are used as the cores of the transformer and the resonant inductance. The decoupling integration method, which integrates the four components into a single core, has been used to increase core utilization and improve power density. On this basis, the transformer's high- and low-voltage windings are cross-arranged to reduce the magnetic field intensity in space, further decreasing the loss and electromagnetic interference. Compared with the EE-type magnetic integrated transformer, the volume of the proposed structure is reduced by 5.9%. A 400W experimental prototype is built, and the results verify the validity of the design.

Modeling and Design of Integrated Inductor and Transformer Considering Superposed Flux Density in On-Board-Charger

High-Density Planar Integrated Magnetics with Two-Sided Merged Inductor Windings and Integrated Cores for Resonant DC/DC Converter

Stacked Spiral Inductor Design and Modeling for Fully-Integrated DC-DC Converters

A novel PCB winding transformer with controllable leakage integration for a 6.6kW 500kHz high efficiency high density bi-directional on-board charger

Magnetic Integration Structure for Two-Stage DC-DC Converters

An Integrated Design of Power Converters for Electric Vehicles.

External Magnetic Field Minimization for the Integrated Magnetics in Series Resonant Converter

Design Methodology of the Planar Integrated Magnetics Based on Asymmetrical Windings for Resonant DC/DC Converter

Analysis, Design, and Implementation of a Spatially Nested Magnetic Integration Method for Inductive Power Transfer Systems

A WBG based three phase 12.5 kW 500 kHz CLLC resonant converter with integrated PCB winding transformer

A High Power Density 48V-12V DCX with 3-D PCB Winding Transformer

High-Frequency High-Density Bidirectional EV Charger

An Optimization Design for Transformer and Output Filter of a Micro-inverter with Passive Integration Technique

An Integrated Structure for Transformer and Output Filter of a Micro-inverter with Flexible Multilayer Foil Technique

A magnetic integration structure for the buck-cascaded half-bridge DC-DC converter

High-Efficiency High-Density MHz Cellular DC/DC Converter for On-Board Charger

Modeling and Optimization of an Integrated Transformer for Electric Vehicle On-Board Charger Applications

Analysis and Comparison of Integrated Planar Transformers for 22-kW On-Board Chargers

Modelling and Optimisation of Planar Matrix Transformer for High Frequency Regulated LLC Converter

Double B-type magnetic integrated transformer based input-parallel output-parallel LLC resonant converter modules

High Power Density 48–12 V DCX with 3-D PCB Winding Transformer