Abstract:The LLC resonant converter used in high-power situations suffers from the problems of high conduction loss and current stress, which can be solved using input-parallel output-parallel (IPOP)-connected converter modules. However, this leads to a multiple increase in the number of magnetic components, which reduces power density. Magnetic integration technology is an effective way to reduce the volume of converters. Currently, the magnetic integrated transformer based on EE-type cores is widely used to realize miniaturization, and it uses leakage inductance instead of resonant inductance to improve power density. However, leakage inductance is difficult to control, and the external radiated magnetic field will produce serious eddy current loss and electromagnetic interference. This article proposes a novel double B-type magnetic integrated transformer, which can integrate the magnetic components of two LLC resonant converters simultaneously and where the resonant inductances are wound independently. The structure contains four low reluctance branches, which are used as the cores of the transformer and the resonant inductance. The decoupling integration method, which integrates the four components into a single core, has been used to increase core utilization and improve power density. On this basis, the transformer's high- and low-voltage windings are cross-arranged to reduce the magnetic field intensity in space, further decreasing the loss and electromagnetic interference. Compared with the EE-type magnetic integrated transformer, the volume of the proposed structure is reduced by 5.9%. A 400W experimental prototype is built, and the results verify the validity of the design.

A magnetic integration structure for the buck-cascaded half-bridge DC-DC converter

Magnetic Integration Structure for Two-Stage DC-DC Converters

High-Density Planar Integrated Magnetics with Two-Sided Merged Inductor Windings and Integrated Cores for Resonant DC/DC Converter

External Magnetic Field Minimization for the Integrated Magnetics in Series Resonant Converter

A Cascaded DC Converter with Primary Series Transformer LLC and Output Interleaved Buck

Power Decoupling Three-Port Converter with Integrated Transformer

Structural Design of A Five-Level Hybrid Active Npc Converter for High Power Density Motor Drives

Current-sharing characteristic of converter composed of LLC with series-parallel transformer and interleaved Buck

Study of Bi-Directional Buck-Boost Converter with Different Control Methods

Modeling and Design of Integrated Inductor and Transformer Considering Superposed Flux Density in On-Board-Charger

Magnetics Integration Scheme for Current Fed ZVS Full Bridge Converter With Current Doubler Rectifier

Design Methodology of the Planar Integrated Magnetics Based on Asymmetrical Windings for Resonant DC/DC Converter

Integration of Both EMI Filter and Boost Inductor for 1-Kw PFC Converter

A High Voltage Gain Three Phase Cascaded DC/DC Converter

An Integrated Inverted and Non-Inverted Buck Converter

Integrated Magnetics Design for a Full-Bridge Phase-Shifted Converter

Modeling and Decoupled Control of a Buck–Boost and Stacked Dual Half-Bridge Integrated Bidirectional DC–DC Converter

A PFC Converter With Novel Integration of Both the EMI Filter and Boost Inductor

Winding Loss Reduction Based on the Even Magnetomotive Force in the Wide-Range RDCX Converter for OBC

Double B-type magnetic integrated transformer based input-parallel output-parallel LLC resonant converter modules

Single magnetic core based inductor integration for battery-friendly LCL-type interleaved interface