Abstract:Dual active bridge (DAB) converters are widely used in the on-board propulsion systems of transportation electrification applications. The tendency of decreasing volume consumption leads to the magnetic integration investigation of the planar transformers. For DABs, integration has been focused on integrating the series inductors and a high frequency transformer (HFT) into a single magnetic component by increasing the leakage inductance of the HFT. This brings a critical issue to the designers: whether structural modification is required for the selected core at the transformer design stage to achieve the aimed leakage inductance. Since equivalent series inductance in power characteristic is replaced by leakage inductance, e accurate leakage inductance estimation strategy is also required. This paper firstly proposed a reluctance based leakage inductance evaluation strategy for the accurate estimation with air-path leakage considered. As the common calculations of the winding-arrangement-dominated leakage inductance commonly ignores the air-path leakage fluxes. Based on the estimation of the threshold leakage inductance, an optimized magnetic integration procedure for planar transformer has been developed, which can help judge whether core modification is required and then provide winding arrangement coordination. 3D Finite Element Analysis (FEA) simulation and prototype experiments were conducted to validate the theoretical analyses.

Magnetics Integration Scheme for Current Fed ZVS Full Bridge Converter With Current Doubler Rectifier

Magnetic Integration Structure for Two-Stage DC-DC Converters

A magnetic integration structure for the buck-cascaded half-bridge DC-DC converter

Coupled Inductor Based Zero-Voltage-switching Buck/boost Converter

Leakage Current Suppression for Transformerless Zvs Full-Bridge Inverter

A Family of Zero-Voltage-Transition Magnetic Coupling Bidirectional DC/DC Converters

Research on Integrated Magnetics Soft Switching Full Bridge DC/DC Converter

A Hybrid ZVS Full-Bridge Converter with Transformer Winding Series-Parallel Auto Regulated Current Doubler Rectifier

A Modified Full Bridge Converter with Magnetic Integration Technique.

External Magnetic Field Minimization for the Integrated Magnetics in Series Resonant Converter

Integrated Magnetics ZVS Full-Bridge Converter with Phase-Shift control

High-Density Planar Integrated Magnetics with Two-Sided Merged Inductor Windings and Integrated Cores for Resonant DC/DC Converter

Design Methodology of the Planar Integrated Magnetics Based on Asymmetrical Windings for Resonant DC/DC Converter

Totem-Pole Boost Bridgeless PFC Rectifier With Simple Zero-Current Detection and Full-Range ZVS Operating at the Boundary of DCM/CCM

Current Double Rectifier Zero Voltage Switching Full Bridge Converter with Auxiliary Network

A hybrid ZVZCS phase-shift full-bridge converter with series/parallel auto-regulated transformer windings

Modeling and Design of Integrated Inductor and Transformer Considering Superposed Flux Density in On-Board-Charger

Input/Output Current Ripple Cancellation and Rhp Zero Elimination in A Boost Converter Using an Integrated Magnetic Technique

Integrated Magnetics Design for a Full-Bridge Phase-Shifted Converter

Magnetic Integration for a Dual Active Bridge Converter Planar Transformer with Accurate Leakage Inductances Estimation