Abstract:The LLC resonant converter used in high-power situations suffers from the problems of high conduction loss and current stress, which can be solved using input-parallel output-parallel (IPOP)-connected converter modules. However, this leads to a multiple increase in the number of magnetic components, which reduces power density. Magnetic integration technology is an effective way to reduce the volume of converters. Currently, the magnetic integrated transformer based on EE-type cores is widely used to realize miniaturization, and it uses leakage inductance instead of resonant inductance to improve power density. However, leakage inductance is difficult to control, and the external radiated magnetic field will produce serious eddy current loss and electromagnetic interference. This article proposes a novel double B-type magnetic integrated transformer, which can integrate the magnetic components of two LLC resonant converters simultaneously and where the resonant inductances are wound independently. The structure contains four low reluctance branches, which are used as the cores of the transformer and the resonant inductance. The decoupling integration method, which integrates the four components into a single core, has been used to increase core utilization and improve power density. On this basis, the transformer's high- and low-voltage windings are cross-arranged to reduce the magnetic field intensity in space, further decreasing the loss and electromagnetic interference. Compared with the EE-type magnetic integrated transformer, the volume of the proposed structure is reduced by 5.9%. A 400W experimental prototype is built, and the results verify the validity of the design.

External Magnetic Field Minimization for the Integrated Magnetics in Series Resonant Converter

High-Density Planar Integrated Magnetics with Two-Sided Merged Inductor Windings and Integrated Cores for Resonant DC/DC Converter

Magnetic Integration Structure for Two-Stage DC-DC Converters

Design Methodology of the Planar Integrated Magnetics Based on Asymmetrical Windings for Resonant DC/DC Converter

Design of High Power Density LLC Resonant Converter with Extra Wide Input Range

Modeling and Design of Integrated Inductor and Transformer Considering Superposed Flux Density in On-Board-Charger

A WBG based three phase 12.5 kW 500 kHz CLLC resonant converter with integrated PCB winding transformer

A Symmetrical Resonant Converter and PCB Transformer Structure for Common Mode Noise Reduction

A Control Method Based on Minimum Conduction Losses for High Efficiency Isolated Dual-bridge Series Resonant Converters.

A magnetic integration structure for the buck-cascaded half-bridge DC-DC converter

A novel PCB winding transformer with controllable leakage integration for a 6.6kW 500kHz high efficiency high density bi-directional on-board charger

1Mhz-1Kw LLC Resonant Converter with Integrated Magnetics

Winding Loss Reduction Based on the Even Magnetomotive Force in the Wide-Range RDCX Converter for OBC

Design Methodology of Resonant Inductor in a ZVS Inverter

High-Frequency PCB Winding Transformer With Integrated Inductors for a Bi-Directional Resonant Converter

Analysis and Suppression of Common-Mode EMI Noise in 1 MHz 380 V-12 V DCX Converter with Low NFoM Devices

Double B-type magnetic integrated transformer based input-parallel output-parallel LLC resonant converter modules

Integrated magnetic for LLC resonant converter

A Novel Integrated Matrix Magnetics for Isolated Single-Stage DC–DC Converter

Modelling and Optimisation of Planar Matrix Transformer for High Frequency Regulated LLC Converter

Phase Shading for Light Load Efficiency Improve in Three-Phase Resonant Converter with Integrated PCB Winding Magnetics