Abstract:Ni-P alloy coatings with tunable phosphorus contents are electrodeposited at room temperature using choline chloride: ethylene glycol (1: 2 molar ratio) deep eutectic solvent and NiCl2 center dot 6H(2)O, NaH2PO2 center dot H2O as nickel and respectively phosphorous sources. Cyclic voltammetry shows that the presentence of H2PO2- in the ionic liquid based Ni plating bath promotes the initiation of Ni-P nucleation. Chronoamperometric results indicate that the electrodeposition of Ni and Ni-P alloys on a platinum electrode follows the mechanism of instantaneous nucleation and three-dimensional growth with diffusion-controlled. Surface morphology and chemical composition of the alloy coatings are significantly dependent on the molar ratio of H2PO2-/Ni2+ in the electrolyte. Moreover, deposition potential and time have a remarkable effect on the surface morphology of deposits. X-ray diffractometer analysis indicates that the structure of alloys converts from crystalline to amorphous structure as the phosphorus content in the coating increases. Potentiodynamic polarization measurements show that the alloy coating exhibits the nobler corrosion potential and the lower corrosion current density compared with the Ni coating. The more phosphorus content the Ni-P coating has, the more positive corrosion potential and the lower corrosion current density the coating exhibits. (C) 2012 The Electrochemical Society. [DOI: 10.1149/2.012211jes] All rights reserved.

Electroless Plating of Ni–P Coatings on Carbon Steel in a Stirred Bed of Glass Balls

Mechanically Assisted Electroless Barrel-Plating Ni-P Coatings Deposited on Carbon Steel

Fabrication and performance of Ni-Co-P/Si3N4 electroplated composite coatings on al-si alloys

Composite Electroless Nickel-nano Al2O3 Coatings on Steel Substrate

Preparation and Properties of Textured Ni–W Coatings Electrodeposited on the Steel Surface from a Pyrophosphate Bath

Preparation and Tribological Properties of the Carbon Nanotubes–ni–p Composite Coating

Electroless Deposition of Ni-Co-P Deposit on NdFeB Permanent Magnets and Its Corrosion Resistance Property

Studies of electroless Ni–Co–P ternary alloy on glass fibers

Electrodeposition of amorphous Ni–P coatings onto Nd–Fe–B permanent magnet substrates

Effect of electroless deposition on the corrosion resistance property for NdFeB permanent magnets with surface coating of Ni-P alloy

Improved microhardness and wear resistance of the as-deposited electroless Ni–P coating

The Research on Coating of Electroless Ni-W-P Ternary Alloys

Ni-Ce-P Electroless Plating and Properties of the Coating on 27simn Steel

Electro-Brush Plating from Deep Eutectic Solvent: A Case of Nanocrystalline Ni Coatings with Superior Mechanical Property and Corrosion Resistance

Electroless deposition of ternary Ni–P alloy coatings containing tungsten or nano-scattered alumina composite on steel

Electrochemical Synthesis and Characterization of Ni–P Alloy Coatings from Eutectic–Based Ionic Liquid

Study on Direct-Current Electroplated Ni-W-P Layer

A novel electrochemical deposited Fe Ni coating designed by laser-induced periodic current density: Effect of microstructure on microhardness and wear resistance improvement

Ni-P coatings electroplating - A review, Part I: Pure Ni-P alloy

Tribological Behavior and Surface Analysis of Ni–P/BP Coatings

Electrodeposition of Ni-P composite coatings: A review