Abstract:The excellent wear resistance and corrosion resistance are needed for composite coating of remanufacturing parts.The composite coatings of Ni-CNTs,Ni-CNTs/PTFE and Ni-WC/PTFE-CNTs were prepared on 45 steel surfaces with brush plating.The surface morphology and microstructure of coatings were observed by XRD or SEM,and the properties of dry friction and wear were measured by ball on disc wear tester,then the corrosion resistance was tested with potentiodynamic polarization curve in 3.5％ NaCl solution.The results showed that the Ni-WC/PTFE-CNTs composite coating had the best wear resistance,and was followed by that of Ni-CNTs/PTFE and Ni-CNTs,which were all better than pure Ni coating.The wear resistance of the Ni-CNTs composite coating with 1.5 g/L was the best.The corrosion resistance of the Ni-CNTs composite coating with 1.0 g/L was the best,and was followed by the wear and corrosion resistance of Ni-WC/PTFE-CNTs,Ni-CNTs/PTFE composite coatings.The worn mechanism of pure Ni coating and Ni-CNTs composite coating were adhesive wear,while the worn mechanism of Ni-CNTs/PTFE composite coating was mainly adhesive wear,and was followed by abrasive wear,and the worn mechanism of Ni-WC/PTFE-CNTs composite coating was mainly abrasive wear and contact fatigue wear.

Preparation and Tribological Properties of the Carbon Nanotubes–ni–p Composite Coating

SYNTHESIS AND THE PERFORMANCE OF CARBON NANOTUBES-(Ni-P) COMPOSITES

Electroless Preparation and Tribological Properties of Ni-P-Carbon Nanotube Composite Coatings under Lubricated Condition

Preparation and Tribological Performances of Ni-P-multi-walled Carbon Nanotubes Composite Coatings

Influence on (Ni-P) Electroless Composite Plating with Carbon Nanotubes

Tribological properties of Ni–P-multi-walled carbon nanotubes electroless composite coating

Tribological Application of Carbon Nanotubes in a Metal-Based Composite Coating and Composites

Friction and wear behavior of Ni-P-carbon nanotubes (CNTs) electroless composite coating

Preparation and properties of Ni/P/single-walled carbon nanotubes composite coatings by means of electroless plating

Tribological-behavior of electroless Ni-P-carbon nanotube comoposite coating

Friction and wear behavior of Ni-based carbon nanotubes composite coatings

Friction and Wear Behavior of Electroless Ni-Based Cnt Composite Coatings

Preparation and Self-Lubricity Investigation of CNTs/Ni Composite Coatings under Severe Conditions

Preparation of Ni-Cnt Composite Coatings on Aluminum Substrate and Its Friction and Wear Behavior

Tribological Behavior of Carbon Nanotubes Composite Coatings at Different Frictional Combination

Effect of Multi-Walled Carbon Nanotubes As Reinforced Fibres on Tribological Behaviour of Ni–P Electroless Coatings

Friction and wear resistance of the electroless Ni-P-CNTs composite coatings

Corrosion Behavior and Wear Resistance Characteristics of Electroless Ni-P-CNTs Plating on Carbon Steel

Study on the Lubrication Properties of Carbon Nanotubes

Dry friction and wear characteristics of nickel/carbon nanotube electroless composite deposits

Friction-wear and Corrosion Resistance of Brush Plated Ni-CNTs/PTFE Nano-composite Coatings