Abstract:<p>Aluminum matrix composites are attractive in aerospace and automobile industry due to its low density, high strength and high corrosion resistance. Additive manufacturing methods such as selective laser melting enables fabrication of such composites with a complex geometry, and processing of novel, customized, tailored hybrid materials with unique hierarchical microstructures across multiple length scales. However, the microstructure evolution, wear resistance, frictional behavior under different fabrication and operation conditions of such composites still need to be explored. This study aims to fill the research gap in microstructure evolution and wear characterization of SLM-produced CNTs reinforced aluminum matrix nanocomposites. The surface characteristics, density, wear groove morphology, and surface damages in wear tests were examined. It was determined with SEM/EDS that the major phases of SLM-processed CNTs/Al-based nanocomposites were Al9Si and Si. These phases formed during the SLM process within the composites changed their wear behavior drastically. The wear surfaces were undergoing severe plastic deformation and progressive pitting. The wear rate of CNTs/AlSi10Mg nanocomposites specimens is about 33% lower than that of AlSi10Mg specimens. The higher wear resistance of the CNTs/AlSi10Mg nanocomposites specimens with shallow and narrow wear groove is attributed to the CNTs reinforcement induced higher surface hardness and also the unique hierarchical microstructure of the nanocomposites. The results showed that SLM-produced CNTs reinforced aluminum matrix nanocomposites have good potentials to be an alternative to pure AlSi10Mg counterparts in terms of hardness, strength, friction and wear behavior.</p>

Fabrication and Tribological Properties of Carbon Nanotubes-Aluminum Composites

Fabrication and tribological properties of carbon nanotubes reinforced Al composites prepared by pressureless infiltration technique

Micro/Nanostructure and Tribological Characteristics of Pressureless Sintered Carbon Nanotubes Reinforced Aluminium Matrix Composites

Preparation and Tribological Properties of the Carbon Nanotubes–ni–p Composite Coating

SYNTHESIS AND THE PERFORMANCE OF CARBON NANOTUBES-(Ni-P) COMPOSITES

Tribological Properties of Carbon Nanotube-Reinforced Composites

Tribological Application of Carbon Nanotubes in a Metal-Based Composite Coating and Composites

Tribological properties of carbon nanotube-doped carbon/carbon composites

Tribological properties of carbon-nanotube-reinforced copper composites

Fabrication of aluminum–carbon nanotube composites and their electrical properties

Friction and wear behaviors of electrodeposited Ni-P-CNTs composite coatings on Al-alloy substrate

Preparation, microstructure and properties of Cu-8.3Al/CNTs composites with different volume fractions of CNTs

Mechanical Effects of Carbon Nanotubes-Graphene Reinforced Aluminium Matrix Composites

Preparation of Ni-Cnt Composite Coatings on Aluminum Substrate and Its Friction and Wear Behavior

Tribological performance of Graphene/Carbon nanotube hybrid reinforced Al2O3 composites

Study on the Properties of Carbon Nanotube (CNTs) Reinforced AlSi10Mg Composites Fabricated by Powder Metallurgy

Tribological Behavior of Carbon-Nanotube-Filled PTFE Composites

Tribological properties of Ni–P-multi-walled carbon nanotubes electroless composite coating

Microstructure and wear characterization of carbon nanotubes (CNTs) reinforced aluminum matrix nanocomposites manufactured using selective laser melting

Improvement of interfacial interaction and mechanical properties in aluminum matrix composites reinforced with Cu-coated carbon nanotubes