Abstract:In this paper, a novel hard nickel composite coatings were fabricated by wide-band laser cladding technique. The effects of Si alloying on the composite coatings were investigated by microstructure characterization, phase identification, microhardness and wear resistance. Results showed that the in-situ precipitated phases in the laser molten pool were composed of the γ-Ni solid solution and hard phases such as Cr 23 C 6 , CrSi, Cr 5 B 3 . With the increase of Si element, the morphology of the precipitated phases changed significantly. When the added content of Si was 1.0 wt.%, the precipitated phase was a mainly block morphology. As the added content of Si was increased to more than 2.0 wt.%, the main precipitated phase was transformed into a long stripe morphology. With the increase of Si content, the stripe-like precipitated phase was gradually refined and finally becomes density needle-like precipitates. Element distribution analysis showed that the block precipitated phase was enriched in Cr, W and Si elements. Additionally, the enriched elements in the long strip precipitation phase were essentially the same as those in the block precipitation phase. The added Si element was highly involved in the in-situ reactions of precipitated phase. The TEM results showed that the precipitated phases contained the crystal structures of Cr 5 B 3 and Cr 7 C 3 . The pin-on-disc wear tests revealed that the composite coating with the addition of 6 wt.% Si exhibited the best wear resistance in the experimental group. The average friction coefficient was about 0.6 and the wear mass loss rate was about 2.38 × 10 −5 g/m under counter-abrasive conditions. The worn surface analysis indicated that the wear mechanism of composite coatings was mainly abrasive wear. The refined needle-like precipitated phase was closely bound to the matrix and thus not easy to peel off, providing a significant improvement in the wear resistance of the laser cladding coatings.

A novel electrochemical deposited Fe Ni coating designed by laser-induced periodic current density: Effect of microstructure on microhardness and wear resistance improvement

Effect of Process Parameters on Microstructure and Properties of AlCoCrFeNi-WC-WS2 Composite Coating Prepared by Laser Cladding

A Novel Strategy for Designing Fe-Ni Gradient Multilayer Coatings Using Laser-Assisted Electrodeposition and Regulation Mechanism

Improvement of Electrochemical deposition Performance and Design of Fe–Ni Multilayer Structure by Nanosecond Laser

Effect of Laser Spot Overlap on the Mechanical Properties and Corrosion Resistance of Laser-Assisted Electrodeposited Ni-based Coatings

A study on the wear and corrosion resistance of high-entropy alloy treated with laser shock peening and PVD coating

Investigation on the Microstructure Evolution and Properties of a Novel In-Situ Fiber Phase-Reinforced Nickel Composite Coating Deposited by Wide-Band Laser

Study on the soft magnetic properties, corrosion, and wear resistance of Ni–Co–W coatings deposited via laser-assisted electrochemical technique: Potential applications in advanced electromagnetic devices

Impact of laser energy density on the structure and properties of laser-deposited Fe‒Ni‒Ti composite coatings

Microstructure and properties of Ni-based self-lubricating coatings by laser cladding/friction stir processing

Mechanical and Tribological Properties of Fe- and Ni-based Coating Material under Laser Cladding Process

The Microstructure and Properties of Ni60/60% WC Wear-Resistant Coatings Prepared by Laser-Directed Energy Deposition

Cu assisted improvement of wear and corrosion resistance in FeCoNiAl high-entropy intermetallic coating by laser cladding

Effect of Laser on Abnormal Reduction Process and Properties Evaluation of Electrodeposited Soft Magnetic Fe-Ni Coating

Effect of Cu-doping on tribological properties of laser-cladded FeCoCrNiCu x high-entropy alloy coatings

Influence of MgAl layered double hydroxide nanosheets on the structure and properties of NiFeP composite coatings

Microstructure, Phase Constituents and Wear Behavior of Fe/Ni-based Laser Clad Layers

Effect of High-Speed Powder Feeding on Microstructure and Tribological Properties of Fe-Based Coatings by Laser Cladding

Laser-irradiation-induced dynamically recrystallized microstructure and properties of supersonic-particle-deposited Ni-Fe-Cr-Nb-Ti-Al high-entropy alloy coating

Microstructure Evolution and Enhanced Wear Resistance of Al2CrFeNiMo High Entropy Alloy Coating Fabricated by Laser Cladding

Microstructures and corrosion resistance of Fe-based amorphous/nanocrystalline coating fabricated by laser cladding