Abstract:The effect of surface brittle-to-ductile transition (BDT) on the high-temperature thermal shock resistance (TSR) of Al2O3 ceramics was investigated by quenching in a cold compressed-air flow. The brittle-to-ductile transition (BDT) and transition temperature were determined from the transformation in fracture mechanism via measuring flexural strength at elevated temperatures. Effects of cooling rate on the residual strength and microstructural evolution of Al2O3 ceramics were systematically studied. Results showed that the BDT temperature in Al2O3 ceramics was around 1000 °C. The BDT mechanism is associated with the softening of the grain boundary glass phase, which permits a certain degree of crack passivation to reduce thermal stress concentration. Compared with the original strength of 375 MPa, the residual strength of the specimen decreased rapidly to 190 MPa at a final temperature of 700 °C, while the residual strength of the specimen was maintained to 352 MPa at a final temperature of 1000 °C. The appearance of surface BDT in Al2O3 ceramics during the high-temperature thermal shock process produces a favorable impact on improving the residual strength of specimens by blunting the crack tip and reducing the surface thermal stress. Therefore, the surface BDT in Al2O3 ceramics is beneficial to the improvement of the high-temperature TSR of Al2O3 ceramics.

Research of Mechanical and Thermal Properties of Al2O3 at Cryogenic Temperatures

Mechanical and Thermal Properties of 99% and 92% Alumina at Cryogenic Temperatures

The cryogenic mechanical properties of translucent alumina

Failure Mechanisms of Al2O3 with Different Glass Phase Content at Cryogenic Temperatures

Mechanical and thermal properties of Al 2O 3-ZrO 2 composite ceramics at cryogenic temperatures

Strengthening Mechanism of Aluminum Nitride Ceramics from 293 to 77 K

Enhanced Mechanical Properties of SiC/Al Composites at Cryogenic Temperatures

Research of Mechanical and Thermal Properties of SiC at Cryogenic Temperatures

Effect of surface brittle-to-ductile transition on high-temperature thermal shock resistance of Al2O3 ceramics

Preparation and research of fine-grained alumina with high mechanical properties

Insight into the high temperature performances of alumina foams

Effect of Alumina Addition on the Properties of Corundum-Mullite Ceramic Matrix

High Temperature Thermal Physical Properties of High-Alumina Fibrous Insulation

Fracture Toughness of Aluminum Nitride Ceramics at Cryogenic Temperatures

Preparation of High Purity Alumina Ceramic Supports at Low Temperature

Effect of Y<sub>2</sub>O<sub>3</sub> on Phase Transformation and Dielectric Properties of Alumina Ceramics

Role of Cryogenic Temperature on the Strengthening Mechanism of Sicw-Al2o3 Composites

The Effect of Al2O3 on the Thermal Stability and Mechanical Properties of 3Y-TZP

Effect of Y2O3 on low temperature sintering and thermal conductivity of AlN ceramics

Effect of trace alumina on mechanical, dielectric, and ablation properties of fused silica ceramics

Low-temperature sintering of Al2O3 ceramics doped with 4CuO-TiO2-2Nb2O5 composite oxide sintering aid