Abstract:Cryogenic strength-toughness relationships for advanced aluminum-lithium alloys 2090, 8090, 8091 and 2091 are examined as a function of microstructure, plate orientation and wrought-product form (plate vs sheet), with specific emphasis on the underlying micro-mechanisms associated with crack advance. It is found that, with decrease in temperature from 298 K to 77 and 4 K, strength, tensile elongation and strain-hardening exponent are increased for all alloy chemistries, microstructures and product forms; however, the longitudinal (L-T, T-L) fracture toughness may increase or decrease depending upon the prevailing microscopic mechanism (microvoid coalescence vs transgranular shear) and macroscopic mode (plane strain vs plane stress) of fracture. In general, alloy microstructures that exhibit changes in either the fracture mechanism or mode at low temperatures show a decrease in L-T toughness. Conversely, when the fracture mechanism is unchanged between ambient and 4 K, observed variations in toughness with temperature are a strong function of the degree of local stress-triaxiality that develops at the crack tip. In very thin sheets, where the fracture mode remains one of plane stress (“slant” fracture), the elevation in toughness at low temperatures is associated with the concurrent increase in tensile strength and ductility; conversely, in thick plate, the increased occurrence of through-thickness delaminations (due to the weak short-transverse properties) at low temperatures locally promotes plane-stress conditions, thereby enhancing toughness by relaxing triaxial constraint. In sheets of intermediate thickness, however, the absence of such through-thickness delaminations permits the expected transition from plane-stress to plane-strain conditions, with the result that the toughness now decreases with reduction in temperature.

Fracture Toughness of Aluminum Nitride Ceramics at Cryogenic Temperatures

Strengthening Mechanism of Aluminum Nitride Ceramics from 293 to 77 K

Enhanced fracture toughness of silicon nitride ceramics at cryogenic temperatures

Fracture mechanism of a fracture-resistant CNT/alumina nanocomposite at cryogenic temperature

Fracture Toughness of 3 Mol% Yttria-Stabilized Zirconia at Cryogenic Temperatures

Slow Crack Growth Behavior of Silicon Nitride Ceramics in Cryogenic Environment

Mechanical and thermal properties of Al 2O 3-ZrO 2 composite ceramics at cryogenic temperatures

Si3N4-SiCw composites as structural materials for cryogenic application

Aluminum nitride‐based ceramics with excellent thermal shock resistances

Mechanisms influencing the cryogenic fracture-toughness behavior of aluminum-lithium alloys

Mechanical and Thermal Properties of 99% and 92% Alumina at Cryogenic Temperatures

Critical grain size and fracture toughness of 2 mol.% yttria-stabilized zirconia at ambient and cryogenic temperatures

Cryogenic toughness of commercial aluminum-lithium alloys: Role of delamination toughening

How Does Crack Bridging Change at Cryogenic Temperatures?

Crack propagation in silicon nitride ceramics under various temperatures and grain boundary toughness

Enhanced Mechanical Properties of SiC/Al Composites at Cryogenic Temperatures

Physical Mechanism of Nanocrystalline Composite Deformation Responsible for Fracture Plastic Nature at Cryogenic Temperatures

The cryogenic mechanical properties of translucent alumina

Failure Mechanisms of Al2O3 with Different Glass Phase Content at Cryogenic Temperatures

Effect of Y2O3 Contents and Grain Sizes on the Mechanical Properties and Transformation of Zirconia Ceramics at Cryogenic Temperatures

Exceptional fracture toughness of CrCoNi-based medium- and high-entropy alloys at 20 kelvin