Abstract:Yttrium-stabilized zirconia (YSZ) materials are routinely used as thermal barrier coatings (TBCs). The phase composition and microstructure of YSZ materials significantly influence their properties. In this study, ZrO2 ceramics composed respectively of monoclinic ZrO2 (m-ZrO2), tetragonal YSZ (t-YSZ) and cubic YSZ (c-YSZ) phases were sintered. The effect mechanism of phase composition and microstructure on thermophysical and mechanical properties were investigated by experiment together and numerical calculation. The result indicates that YSZ materials with c-YSZ phase are more suitable as TBC materials in terms of heat insulation, thermal expansion match with the metal substrate, and strain tolerance. The YSZ ceramic with c-YSZ phase also exhibits lower thermal conductivity than those composed of the t-YSZ and m-ZrO2 phases due to its greater lattice distortion, number of oxygen vacancies, and lower sound velocity as a result of greater Y2O3 doping. Bond lengths and cohesive energy calculations based on first principles reveal that the reason that the Y2O3 doping causes the CTE values of ZrO2 to increase is due to the bonding between ions becoming weaker, and the c-YSZ phase exhibits the highest CTE value. First-principles calculations also indicate that the c-YSZ phase exhibits a lower elastic modulus and better malleability and plasticity than m-ZrO2 and t-YSZ phases. However, the t-YSZ phase has better fracture toughness due to toughening under stress and finer grains.

Mechanical and thermal properties of Al 2O 3-ZrO 2 composite ceramics at cryogenic temperatures

Toughening Mechanisms of ZTA Ceramics at Cryogenic Temperature (77 K)

Mechanical and Thermal Properties of 99% and 92% Alumina at Cryogenic Temperatures

Research of Mechanical and Thermal Properties of Al2O3 at Cryogenic Temperatures

Enhanced Mechanical Properties of SiC/Al Composites at Cryogenic Temperatures

Phase Transformation and Exceptional Mechanical Properties of 3Y-TZP at Cryogenic Temperature

Effect of Y2O3 Contents and Grain Sizes on the Mechanical Properties and Transformation of Zirconia Ceramics at Cryogenic Temperatures

Effects of ZrB2 on Mechanical Properties of Al2O3-ZrB2-SiC Composite Ceramics at Room Temperature

Fracture Toughness of 3 Mol% Yttria-Stabilized Zirconia at Cryogenic Temperatures

Preparation and thermal shock resistance investigation of ZTA-La 2 O 3 composite ceramics for porous medium combustion materials

The cryogenic mechanical properties of translucent alumina

Failure Mechanisms of Al2O3 with Different Glass Phase Content at Cryogenic Temperatures

Phase transformation of Y-Ce-TZP/Al2O3 composite ceramic annealed in air

Fracture mechanism of a fracture-resistant CNT/alumina nanocomposite at cryogenic temperature

Thermophysical and mechanical properties of cubic, tetragonal and monoclinic ZrO2

Research into Mechanical Properties of Reaction-Bonded Sic Composites at Cryogenic Temperatures

Mechanical properties and fracture behavior of ultrahigh temperature ceramics at ultrahigh temperatures

R‐Curve Behavior of 3Y‐TZP at Cryogenic Temperatures

The phase stability of t-ZrO2 realized by grain size at cryogenic temperature in ZrO2/TiO2 composite

Fracture Toughness of Aluminum Nitride Ceramics at Cryogenic Temperatures

Si3N4-SiCw composites as structural materials for cryogenic application