Abstract:In the pursuit of higher operating temperatures and better durability of thermal barrier coating (TBC) materials, the currently used air-plasma-sprayed (APS) 8 wt.% yttria-stabilized zirconia (8YSZ) ceramic is faced with a phase degradation problem regarding its initial metastable T prime (T′) phase, which results in residual stress and cracks during long-term operations. In this study, we focus on the relationship between the long-term phase transformation and mechanical properties, which facilitates the simulation and prediction of properties under operating conditions. Field-assisted sintering specimens of the pure T′ phase were annealed at 1300 °C for different periods of time to obtain various phase compositions. A nano/micro hybrid structure was observed as the phase transformation developed. The Vickers hardness of the materials increased by 8% due to the precipitation of fine T phase grains. On the other hand, the bending strength decreased by more than 60% when the T′ phase decomposed from 70 to 20 vol.%. A noteworthy reduction in the fracture toughness, along with a decrease in the volume percentage of the T′ phase, was also observed during long-term degradation. Effects of the T′ phase decomposition on mechanical properties are discussed in this paper. This systematic research on the mechanical properties and phase degradation of YSZ is of significant importance in predicting and evaluating the performance evolvement of TBCs.

Phase transformation of Y-Ce-TZP/Al2O3 composite ceramic annealed in air

Effect of Al2O3 on the Phase Stability of Y-Ce-TZP/Al2O3 Composites at Low Temperature

The Effect of Al2O3 on the Thermal Stability and Mechanical Properties of 3Y-TZP

Preparation and properties of Al2O3/Al-2(1-0.2)Mg0.2Ti(1+0.2)O5 matrix ceramic composite

Effect of thermal treatment at high temperature on phase stability and transformation of Yb2O3 and Y2O3 co-doped ZrO2 ceramics

Effect of Al2O3 on Degradation of 3Y-TZP Ceramics at Low Temperature

Mechanical properties of low-temperature sintered Al2O3/3Y-TZP composites

High Temperature Mechanical Properties of Zirconia Metastable T '-Phase Degraded Yttria Stabilized Zirconia

Realizing reversible phase transformation of shape memory ceramics constrained in aluminum

Insights into Intragranular Precipitation and Strengthening Effect in Al2O3/SmAlO3 Ceramic with Eutectic Composition

Preparation and Phase Stability of YSZ-alumina Composite by Roller Vibration Milling

Sintering Behavior and Mechanical Properties of Alumina-Coated Zirconia Ceramics

Effect of Al2O3 addition on mechanical properties of SiC-platelet/Y-TZP composites

Mechanical and thermal properties of Al 2O 3-ZrO 2 composite ceramics at cryogenic temperatures

Influence of a small amount of Al2O3 addition on the transformation of Y2O3-partially stabilized ZrO2 during annealing

Controlled sintering and phase transformation of yttria-doped tetragonal zirconia polycrystal material

Diffusionless Cubic-To-Tetragonal Phase-Transition And Microstructural Evolution In Sintered Zirconia Yttria Ceramics

Structural Evolution and Mechanical Behavior of Ytterbia Doped Hafnia Biphasic Ceramics under Annealing at 1500 °C

Influence of Y2O3 contents on sintering and mechanical properties of B4C-Al2O3 multiphase ceramic composites

Influence of Y2O3 Doping on Phase Evolution and Dielectric Characteristics of ZrO2 Ceramics

Electrical Conductivity of Y2O3-doped CeO2 Based Composite Ceramics by Spark Plasma Sintering: the Effects of a Second Phase of CeAlO3